Bridgend · Wales
Bath re-enamelling & resurfacing in Pyle, Bridgend
Full bath re-enamelling and resurfacing in Pyle, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
About our bath re-enamelling in Pyle
When a bath is structurally fine but worn out on the surface, re-enamelling is generally the most cost-effective option. There is no removal, plumbing or tiling involved. Typical jobs include a bath that stays dull however much you clean it and wear marks under the taps, in Victorian roll-tops, acrylic baths and cast iron baths.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Pyle (CF33)
- County
- Bridgend
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath re-enamelling in Pyle?
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
The most common problems we are called about are:
- A dull, rough surface that won’t come clean
- Stains that will not shift
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
Comparing quotes
- What happens if the damage is worse than the pictures show
- How long it needs to cure
- How your room will be protected
- Whether a trained technician does the job
About Pyle
Pyle (Welsh: Y Pil) is about 3 miles north of Porthcawl, in Bridgend. Our technicians come to customers in Pyle, so there’s no workshop to go to. Pyle is one of 91 places in Bridgend where we work.
Here we cover the CF33 postcode area. That includes homes on Baiden Avenue, North Avenue and Pisgah Street and the roads around them. Nearby, we also work in Mynyddcynffig (1 mile north-east), Kenfig Hill (1 mile north), Llandudwg Uchaf (1 mile south-east), Pen-y-bryn (1 mile north) and Cefn Cribwr (2 miles east). Within a short drive, we also cover Bridgend (5 miles east), Maesteg (6 miles north), Porthcawl (3 miles south), Newcastle Higher (5 miles south-east), Ynysawdre (4 miles east) and Pencoed (8 miles east).
Near you in Pyle
Typical jobs here are in homes near Walnut Tree pub, St James's Church and Cynffig Comprehensive School. For rail, the closest station is Pyle station, roughly 0.6 miles south-west of the centre. Other landmarks nearby include Margam Stones Museum (3 miles north-west) and Glanrhyd Hospital (4.2 miles east). Green spaces nearby include Cornelly Quarry Lake 1 and Stormy Down.
For landlords and businesses
Landlords, letting agents and housing providers in Pyle use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
How to care for the repair
Nothing complicated is needed:
- Keep suction mats out of the bath
- Keep toiletries on a shelf rather than in the bath
- Fix dripping taps quickly
- Use washing-up liquid and a soft cloth
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Pyle questions
How do I get a price for bath re-enamelling in Pyle?
Resurfacing from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item with your CF33 postcode.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we will take it from there.
How long is the bath unusable?
Usually one day, with the bath ready the following day. A badly pitted bath can need a second day.
Can you repair something that’s been repaired before?
In most cases. The old repair comes out first, so mention it when you send photos.
What happens after I send photos?
We come back with a fixed price. You’re under no obligation.
Is there a guarantee?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
DIY kit or professional repair?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We clean up when we are done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Tell us about parking, stairs or access
- Open a window if you can
- Clear the area around the damage
Getting a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
What affects the price in Pyle
Resurfacing from £350. We charge the same across the UK, including Pyle. What changes the price is:
- How hard the colour is to match
- What kind of damage it is
- Doing more than one item at once
- The material
We charge the same wherever you are, with no extra for Pyle. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from pictures
The better the photos, the more accurate the price. Here’s what helps:
- Something in shot to show the size
- The postcode, so we can plan the visit
- Details of any past repairs
- Good light, ideally daylight, without flash glare
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
What we can’t put right
It helps to know what we cannot do:
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
- Problems we can’t see until an old finish comes off
Not sure? Send photos and we’ll give you a straight answer before you book.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
Towns and villages near Pyle
More services for Pyle
About our accreditations · Every repair comes with a one-year guarantee.
