Isle of Anglesey · Wales
Bath Re-enamelling in Pen-Lôn
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Pen-Lôn. Send photos for a free, fixed quote.
- Resurfacing from £350
- Stains that will not shift
- Lots of chips and rust spots
How we handle bath re-enamelling in Pen-Lôn
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. If you’re dealing with a coating lifting around the plughole and lots of chips and rust spots, we can normally put it right, on pressed steel baths, basins & shower trays and cast iron baths alike.
We stand behind the work with a one-year guarantee.
- Where
- Pen-Lôn (LL61)
- County
- Isle of Anglesey
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
To be straight with you, some problems need a different fix:
- Plumbing leaks, which need a plumber
- Acrylic that moves when you stand in it
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we’ll say what we think.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What we do, step by step
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Let us know if it has been repaired before
- Make sure the area is dry
- Point us to the nearest place to park
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. There is no charge for the quote and no obligation.
Advice
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Keeping it looking good
Aftercare is simple:
- Store bottles off the bath
- Wipe the bath dry after use in hard water areas
- Repair dripping taps early
- Keep suction mats out of the bath
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
What bath re-enamelling costs
Prices start from £350. Prices are worked out job by job, from your photos. What matters most is:
- The colour and finish to match
- Any earlier repairs that need removing first
- Doing more than one item at once
- Where the damage is and how we get to it
The price reflects the work involved, not your postcode. You’ll see the full price before you book, with nothing added on the day.
Getting a price from photos
You can normally get a fixed price without us visiting. To make it quick:
- Whether it’s been repaired or coated before
- A wider photo showing the whole bath
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
To get a price, send a couple of photos through our quote form or call us. We will say immediately whether it can be repaired.
Places near Pen-Lôn
More services for Pen-Lôn
Pen-Lôn and the surrounding area
Pen-Lôn is about 4 miles west of Caernarfon, in Isle of Anglesey. We agree a date that works for you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Our technicians cover 115 places in Isle of Anglesey. Our nearest city page is Liverpool, about 61 miles away.
Here we cover the LL61 postcode area. If you’re just outside Pen-Lôn, we cover Newborough (1 mile north-west), Llangeinwen (1 mile north-east), Dwyran (1 mile north-east), Llangaffo (2 miles north) and Malltraeth (3 miles north-west). Larger places within reach include Blackbridge (15 miles north-west), Llangefni (7 miles north), Menai Bridge (9 miles north-east), Porthaethwy (9 miles north-east), Morawelon (15 miles north-west) and Llanfair Pwllgwyngyll (8 miles north-east).
Around Pen-Lôn
Typical jobs here are in homes near White Lion pub, Ysgol Gynradd Niwbwrch and St Peter's Church and the streets around them. The closest station to Pen-Lôn is Bodorgan station, about 4.2 miles north-west. A little further out are Caernarfon Castle (3.3 miles south-east) and Clynnog Fechan (0.5 miles north-east). Not far away are Llyn Rhos-ddu and Coed Helen.
Repair or replace in Pen-Lôn?
Replacing a bath usually involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why Pen-Lôn customers choose us
- A year’s guarantee on all work
- One visit for most repairs
- Honest advice, even when it means no job
- CHAS and Constructionline accredited
See our prices page or bath cost comparison.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Your questions about bath re-enamelling in Pen-Lôn
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How much does bath re-enamelling cost in Pen-Lôn?
Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo with your LL61 postcode.
Can you redo someone else’s repair?
Yes, regularly. Removing the old work can add time, and that is in the quote.
What happens next?
You will get a fixed quote back, plus dates. You’re under no obligation.
How long will the bath be out of use?
One day for most baths, ready the following day. We give you timings with the quote.
Can you price it without visiting?
Usually, yes. A close-up and a wider photo are enough to give a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
