Gloucestershire · England
Bath Re-enamelling in Pendock
Bath re-enamelling in Pendock without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- Several chips and rust patches
Bath re-enamelling at your home in Pendock
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Typical jobs include a coating lifting around the plughole and lots of chips and rust spots, across basins & shower trays, cast iron baths and pressed steel baths.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we’ll come back.
- Location
- Pendock (GL19)
- Area hub
- Gloucestershire
- Cover
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace: which is better?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling renews the entire surface without moving it. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why choose Surface Doctor in Pendock
- CHAS, Constructionline and SafeContractor accredited
- One visit for most repairs
- Everything repaired in place
- We leave the room as we found it
Take a look at our pricing or bath cost comparison.
What we’re called out for in Pendock
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
If you can see any of these, send us a picture:
- Brown or grey marks that don’t clean off
- A roll-top that’s seen better days
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
Before you book anyone
- When it can be used again
- What happens if they find more damage
- Whether cleaning and preparation are in the price
- Who turns up on the day
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Where we work around Pendock
Pendock is about 7 miles west of Tewkesbury, in Gloucestershire. Customers in Pendock get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. Our repair technicians cover 470 places in Gloucestershire, from the larger towns to small villages. We work right across the region, from Pendock to Birmingham (about 37 miles away).
We work across GL19 and the streets around it. We also cover the places around Pendock: Wyndbrook (1 mile south-west), Lowbands (1 mile south-west), Redmarley D'Abitot (2 miles south-west), Staunton (2 miles south) and Hawcross (3 miles south-west). Larger places within reach include Cheltenham (12 miles south-east), Gloucester (11 miles south), Tewkesbury (7 miles east), St Paul's (12 miles south-east), Lansdown (12 miles south-east) and Bishop's Cleeve (11 miles east).
Near you in Pendock
We visit homes around Pendock CofE Primary School and Church of the Redeemer, among other places. Other landmarks nearby include Bronsil Castle (3.4 miles north-west). Green spaces nearby include Raggedstone Hill and Hollybed Farm Meadows.
FAQs for Pendock
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one, so let us know about it.
Can you price it without visiting?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
What if the damage is worse than the photos show?
We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Do you cover the whole of Gloucestershire?
The entire UK, including all of Gloucestershire. Send your postcode with your pictures and we’ll offer you dates.
What a repair can’t fix
Before you book, it’s worth knowing the limits:
- A metal bath with a through crack
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
Send us pictures and we will tell you honestly.
What we work on
- Pressed steel baths
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- What the surface is made of
- The size and number of damaged areas
- Where the damage is and how we get to it
- What kind of damage it is
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
The better the photos, the more accurate the price. Here’s what we find most useful:
- One sharp close-up of the damage
- Something in shot to show the size
- One picture of the entire bath
- Any earlier repairs or coatings
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and you are under no obligation.
Aftercare tips
Simple care helps the repair last. Our advice:
- Repair dripping taps early
- Clean with a soft cloth and mild detergent
- Rinse off hair dye, oils and bath bombs right away
- Avoid suction-cup mats
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and don’t leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
What happens on the day
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the job itself takes the best part of a day. Before we leave, we explain how soon it can be used and how to care for it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Before we arrive
- Let us know which floor the room is on
- Plan for the room to be out of bounds to pets and children
- Move bottles, mats and clutter away from the area
Ask for a price
Upload a photo of the damage and one of the entire item, with your GL19 postcode, and we will come back with a fixed quote.
Read more
Also near Pendock
What else we do in Pendock
About our accreditations · Every repair comes with a one-year guarantee.
