Worcestershire · England

Bath re-enamelling & resurfacing in Peopleton, Worcestershire

We travel to Peopleton for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.

Resurfacing from £350
Staining under the taps and around the waste
Worn patches where water runs and sits

Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Peopleton

Repairing versus replacing in Peopleton

For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

Why us?

Accredited with CHAS, Constructionline and SafeContractor
Free fixed quotes from pictures
Rooms protected and left tidy
One-year guarantee on every repair

Take a look at our full price list or bath cost comparison.

Bath re-enamelling at your home in Peopleton

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s lots of chips and rust spots and brown or grey marks that don’t clean off, we can usually put it right, whatever the material.

Your repair is guaranteed for a year, as with every job we do.

Area: Peopleton (WR10)
Area hub: Worcestershire
Warranty: 12 months on all our work
Price: From £350. Free, fixed quote from pictures
Telephone: 0345 017 0787
Last updated: 23 October 2026

Repairs by material

Acrylic

Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Our work in Peopleton

Peopleton is about 6 miles south-east of Worcester, in Worcestershire. Across the WR10 area, we carry out the work at your property. Peopleton is one of 376 places in Worcestershire we cover. Our jobs stretch from Peopleton to Birmingham (23 miles away).

Jobs in WR10 work the same way as everywhere else we cover. Streets in the area include Norchard Lane and Monks Way, all of which we cover. Close by, we cover Pinvin (2 miles south-east), Naunton Beauchamp (2 miles north-east), Upton Snodsbury (2 miles north), Wyre Piddle (2 miles south-east) and Throckmorton (3 miles east). Larger places within reach include Worcester (6 miles north-west), Redditch (12 miles north-east), Bromsgrove (12 miles north), Great Malvern (10 miles west), Droitwich Spa (8 miles north) and Evesham (8 miles south-east).

Landmarks near Peopleton

Our clients here include homes close to Pershore High School, Church of St Nicholas and Bowbrook House School and the streets around them. For rail, the closest station is Pershore station, roughly 1.8 miles south-east. Further afield, we also cover the area around Worcestershire Royal Hospital (4.7 miles north-west). Open spaces near Peopleton include Tiddesley Wood.

Map of Peopleton © OpenStreetMap contributors

Keeping it looking good

Simple care helps the repair last. We recommend:

Wash away dyes and oils after use
Keep toiletries on a shelf rather than in the bath
Get any chip repaired quickly
Use washing-up liquid and a soft cloth

Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.

On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.

What affects the price in Peopleton

Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:

How many items we do on one visit
Unusual colours or finishes
Previous DIY repairs that have to come out
The size and number of damaged areas

There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Getting a price from pictures

Most quotes are done from pictures alone. To make it quick:

One picture of the entire bath
Natural light rather than flash
A clear, close picture of the problem area
Whether it’s been repaired or coated before

If you’re in Peopleton and want a price, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

Can I fix it myself?

If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Work for landlords and builders

Builders use us to fix snagging damage before handover. Several plots can be done in one visit.

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.

Peopleton: your questions answered

Is my repair covered?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

What happens if you find more damage?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

Can you resurface a pink bath in white?

Yes, white is the usual choice. Mention the colour you want when you send photos.

Is there a call-out fee?

No. Our quotes include travel, and we charge the same wherever you are.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.

How do I get a price for bath re-enamelling in Peopleton?

Resurfacing from £350. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo with your WR10 postcode.

Will the new finish last?

That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.

Is it safe with children and pets around?

Just keep them out of the work area. We will let you know when it’s safe to use again.

What happens on the day

Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. You can expect it to take the best part of a day, and we will tell you if anything changes.

First we look the bath over and confirm the finish.
Taps, tiles and the floor are masked off.
We degrease the bath, fix any damage and key the surface.
We apply the primer and then the finish coats.
The masking comes off, we tidy up and tell you when it can be used.

Getting ready for the visit

Clear the area around the damage
Tell us if there are stairs or a lift
Let the surface dry out before the visit

Getting a price

Most customers in Peopleton get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Get a fixed price