Worcestershire · England
Bath re-enamelling & resurfacing in Pinvin, Worcestershire
Fixed-price bath re-enamelling in Pinvin and the surrounding area, normally in one visit.
- Resurfacing from £350
- Chips and rust in more than one place
- Enamel that is lost its shine and feels rough
How the visit works
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the job takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Open a window if you can
- Plan for the room to be out of bounds to pets and children
- Mention any parking restrictions or tricky access
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Advice
How we handle bath re-enamelling in Pinvin
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Whether it’s an original cast iron bath that needs restoring and a coloured bath you want in white, we can usually put it right, whatever the material.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.
- Where
- Pinvin (WR10)
- Area hub
- Worcestershire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Worcestershire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Common questions in Pinvin
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
How long does re-enamelling take?
Typically one day, with the bath ready the day after. A badly pitted bath can need a second day.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
What information do you need?
Use the quote form or ring 0345 017 0787, and we’ll do the rest.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Do you do work for letting agents?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Repair or replace in Pinvin?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and usually a day. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. You will see the full price before booking, with nothing added on the day.
Why book with us
- No extra charge for your area
- Fixed prices from your photos
- Rooms protected and left tidy
- Colour mixed on the day to match
See our pricing and resurfacing vs replacement cost guide.
What affects the price in Pinvin
Prices start from £350. We charge the same across the UK, including Pinvin. The price reflects:
- How hard the colour is to match
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
- Whether it’s a chip, crack, burn or wear
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
Most quotes are done from photos alone. To make it quick:
- One picture of the entire bath
- A clear, close picture of the problem area
- Natural light rather than flash
- A coin or ruler next to the damage for scale
Most clients in Pinvin get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Common problems we fix in Pinvin
Older baths often have several problems at once: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
The most common problems we are called about are:
- A peeling or bubbling previous coating
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
- A bath that stays dull however much you clean it
What your quote should include
- How long the guarantee is and what it covers
- Whether the price covers travel
- How long it needs to cure
- Is the price fixed, and does it include VAT?
When a repair is not the answer
To be straight with you, there are a few things a repair will not fix:
- Problems we cannot see until an old finish comes off
- Leaks from fittings rather than the bath
- Steel that has corroded right through
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Keeping it looking good
Looking after the surface is easy:
- Leave the bath for the full curing time before using it
- Do not leave a chip unrepaired
- Stick to gentle, non-abrasive cleaners
- Fix dripping taps quickly
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Also near Pinvin
More services for Pinvin
About Pinvin
Pinvin is about 6 miles north-west of Evesham, in Worcestershire. We agree a date that works for you, and you will know when to expect us, so there’s no waiting around. Pinvin is one of 376 places in Worcestershire we cover. You can also see our page for Birmingham, about 24 miles away.
Postcode districts we cover here: WR10. We regularly work on streets such as Main Street, Ashfurlong Drive and Spion Kop and the roads around them. Neighbouring places we cover include Wyre Piddle (1 mile south-east), Pershore (2 miles south), Peopleton (2 miles north-west), Throckmorton (2 miles east) and Lower Moor (2 miles south-east). Within a short drive, we also cover Worcester (7 miles north-west), Redditch (13 miles north-east), Bromsgrove (14 miles north), Great Malvern (11 miles west), Droitwich Spa (9 miles north-west) and Evesham (6 miles south-east).
What’s near Pinvin
Around Pinvin, we work in homes near Pinvin CofE First School, Pershore High School and Church of St Nicholas. There is a railway station in Pinvin itself: Pershore station. For a walk, there’s Tiddesley Wood.
About our accreditations · Every repair comes with a one-year guarantee.
