West Sussex · England
Bath Re-enamelling in Pickhurst
Local bath re-enamelling for Pickhurst: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Brown or grey marks that don’t clean off
Bath re-enamelling at your home in Pickhurst
The bath stays where it is, so your taps, tiles and plumbing are left alone. It generally takes one visit, and can be used again the next day. Typical jobs include a period or roll-top bath worth keeping and stains that won’t shift, across basins & shower trays, acrylic baths and cast iron baths.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Pickhurst (RH20)
- Region
- West Sussex
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When a repair is not the answer
A few problems are outside what a surface repair can do:
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
Send us pictures and we will tell you honestly.
Materials we work on in Pickhurst
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- Clean with a soft cloth and mild detergent
- Leave the bath for the full curing time before using it
- Wash away dyes and oils after use
- Keep suction mats out of the bath
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Also near Pickhurst
More services for Pickhurst
Repair or replace: which is better?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why book with us
- Work done at your home or business
- A fixed quote before booking
- We’ll tell you if it’s not worth repairing
- Generally one visit, start to finish
Take a look at our pricing or resurfacing vs replacement cost guide.
Pickhurst: your questions answered
Will the bath be moved?
No. We resurface it in place, so nothing else is disturbed.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Is my repair covered?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Will there be fumes?
A little, during the work. We set up ventilation and the smell fades as it cures.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Can a failed resurfacing be redone?
Usually, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
Can you repair something that is been repaired before?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
How long will the bath be out of use?
Generally one day, with the bath ready the next day. Deeply pitted baths may need a second day.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Work for landlords and builders
If you manage property in Pickhurst, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
The process
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take the best part of a day. We clean up when we’re done and tell you when it’s ready to use.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Keep pets and children out of the room while we work
- Mention any earlier repairs or resurfacing
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed price, not an estimate.
Related advice
Where we work around Pickhurst
Pickhurst is about 11 miles south-west of Horsham, in West Sussex. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 371 towns and villages in West Sussex. We work right across the region, from Pickhurst to London (40 miles away).
Here we cover the RH20 postcode area. We also travel to Pulborough (1 mile south-east), Bedham (2 miles west), Hardham (2 miles south), Fittleworth (2 miles south-west) and Lower Horncroft (3 miles south-west). Larger places within reach include Horsham (11 miles north-east), Worthing (12 miles south-east), Bognor Regis (15 miles south-west), Chichester (15 miles south-west), Littlehampton (11 miles south) and Shoreham-by-Sea (15 miles south-east).
What’s near Pickhurst
The nearest railway station is Pulborough station, roughly 1.4 miles south of the centre. Nearby you will also find Coates Castle (3.6 miles south-west). For a walk, there’s The Mens.
Signs you need bath re-enamelling in Pickhurst
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Look out for these signs:
- An outdated colour you’d like to change
- Worn patches where water runs and sits
- Several chips and rust patches
- An old resurfacing that’s failing
Questions to ask before you book
- How changes to the job are handled
- What aftercare is recommended
- Is the price fixed, and does it include VAT?
- Whether cleaning and preparation are in the price
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
About our accreditations · Every repair comes with a one-year guarantee.
