Bury · England
Bath Re-enamelling for Pilsworth homes
Full bath re-enamelling and resurfacing for homes and businesses in Pilsworth and across Bury. Free, fixed quotes from your photos.
- Resurfacing from £350
- An old resurfacing that is failing
- A bath that stays dull however much you clean it
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Bath re-enamelling at your home in Pilsworth
When a bath is structurally fine but worn out on the surface, re-enamelling is generally the most cost-effective option. There’s no removal, plumbing or tiling involved. Our repair technicians work on pressed steel baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are a peeling or bubbling previous coating and thin, worn enamel in places.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Pilsworth (BL9)
- Region
- Bury
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Landlord and trade work in Pilsworth
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Pilsworth: your questions answered
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can you change the colour of my bath?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Can I add another job to the visit?
Of course, and it normally saves money. Just add the extra items to your pictures and we’ll quote them together.
Are there extra charges for Pilsworth?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Will the price change on the day?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Do you need bath re-enamelling in Pilsworth?
Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
The things clients generally mention when they call are:
- An outdated colour you’d like to change
- A coating lifting around the plughole
- Chips and rust in more than one place
- A dull, rough surface that will not come clean
Comparing quotes
- How the room is protected while they work
- Whether they match the colour on site
- A fixed quote, and whether VAT is included
- How soon you can use it again
Also in Pilsworth
Honest limits
Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
Our work in Pilsworth
Pilsworth is about 1 mile south-east of Gigg, in Bury. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Pilsworth is one of 40 places in Bury we cover. We work right across the region, from Pilsworth to Manchester (about 7 miles away).
Jobs in BL9 work the same way as everywhere else we cover. That includes homes on Aviation Road, Pilsworth Road and Roach Bank Road. Close by, we cover Gigg (1 mile north-west), Fishpool (1 mile north-west), Unsworth (1 mile south), Darnhill (2 miles north-east) and Whitefield (2 miles south). Further out, we also cover Prestwich (4 miles south), Ramsbottom (5 miles north-west), Tottington (4 miles north-west), Brandlesholme (3 miles north-west), Greenmount (4 miles north-west) and Stoneclough (4 miles south-west).
Around Pilsworth
In Pilsworth, that means homes near Hollins Grundy Primary School, Holy Cross College and Queen Anne pub. The nearest railway station is Clifton station, roughly 4.1 miles south of the centre. Further afield, we also cover the area around Bealey Community Hospital (1.6 miles south-west) and The Fusilier Museum (1.3 miles north-west). Open spaces near Pilsworth include Nob End.
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Pilsworth
- One visit for most repairs
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
- Fixed prices from your photos
Take a look at our pricing or guide to resurfacing and replacement costs.
How the visit works
Visits start with a quick look at the job together. After that, protection goes down around the work area and the work begins. Allow most of the day, and we’ll tell you if anything changes.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Mention any parking restrictions or tricky access
- Tell us about any previous repairs or coatings
- Have somewhere for us to park nearby if possible
How to get a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Read more
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Repair dripping taps early
- Keep toiletries on a shelf rather than in the bath
- Stick to gentle, non-abrasive cleaners
- Do not use the bath until it has fully cured
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
