Bury · England
Bath Re-enamelling in Simister
Bath re-enamelling across Simister and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Staining under the taps and around the waste
- Chips and rust in more than one place
What affects the price in Simister
Prices start from £350. Prices are worked out job by job. The main factors are:
- Doing more than one item at once
- Unusual colours or finishes
- Where the damage is and how we get to it
- Whether old repairs or coatings need taking off
Compared with replacing, a repair is normally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Send pictures for a quote
Good pictures mean an accurate price. Here’s what helps:
- Any earlier repairs or coatings
- What it’s made of, if you know
- Natural light rather than flash
- A wider photo showing the whole bath
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you are under no obligation.
How we handle bath re-enamelling in Simister
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. We work on pressed steel baths, cast iron baths and acrylic baths, and common reasons people get in touch are a bath in a colour that no longer suits and stains that won’t shift.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Simister (M25)
- County
- Bury
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
What you get with us
- A fixed quote before you book
- CHAS and Constructionline accredited
- No extra charge for your area
- Repair technicians who travel to you, UK-wide
Read our pricing or guide to resurfacing and replacement costs.
How it works
You do not need to empty the room beforehand. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. It generally takes most of the day, and you can get on with other things while we are there.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Make sure the area is dry
- Tell us if there are stairs or a lift
Ask for a price
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
Keeping it looking good
It’s all simple stuff:
- Do not let dyes or oils sit on the finish
- Get any chip repaired quickly
- Keep suction mats out of the bath
- A dripping tap should be fixed promptly
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Towns and villages near Simister
More services for Simister
Landlord and trade work in Simister
If you manage property in Simister, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
Landlords, letting agents and housing providers in Simister use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Honest limits
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Acrylic that moves when you stand in it
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
Send us pictures and we will tell you honestly.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Your questions about bath re-enamelling in Simister
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
How long is the bath unusable?
One day for most baths and can be used the day after. We give you timings with the quote.
Do I need to be at home?
We need someone to let us in. You don’t need to watch us work.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Our work in Simister
Simister is about 2 miles east of Whitefield, in Bury. We travel to customers in Simister and nearby villages, so you don’t need to take anything anywhere. We cover 40 places across Bury, from the larger towns to small villages.
We work across the M25 postcode area and the streets around it. Jobs here include addresses on Simister Lane, Mount Pleasant and Croft Avenue. We also cover the places around Simister: Bowlee (1 mile east), Rhodes (1 mile east), Besses o' th' Barn (1 mile west), Unsworth (1 mile north-west) and Whitefield (2 miles west). Within a short drive, we also cover Bury (4 miles north-west), Radcliffe (3 miles west), Ramsbottom (7 miles north-west), Tottington (6 miles north-west), Elton (4 miles north-west) and Fishpool (3 miles north-west).
Around Simister
Our clients here include homes close to Church of St George, St Margaret's Church of England Primary School and Farmers Arms and the streets around them. The nearest railway station is Clifton station, roughly 3.2 miles south-west of the centre. A little further out are Heaton Park Tramway Museum (0.7 miles south) and North Manchester General Hospital (2.2 miles south-east). Not far away are Tandle Hill and Boating lake.
About our accreditations · Every repair comes with a one-year guarantee.
