Rutland · England
Bath re-enamelling & resurfacing in Pilton, Rutland
Bath re-enamelling across Pilton and nearby, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- Chips and rust in more than one place
- A bath in a colour that no longer suits
Where we work around Pilton
Pilton is about 5 miles south-east of Oakham, in Rutland. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Our repair technicians cover 47 places in Rutland, from the larger towns to small villages. We work right across the region, from Pilton to Birmingham (about 53 miles away).
Our technicians cover all of the LE15 postcode area. Whether you live on Church Lane and Pinfold Lane or a nearby road, a technician can come to you. Neighbouring places we cover include Lyndon (1 mile north-west), North Luffenham (1 mile east), Wing (1 mile west), Edith Weston (2 miles north-east) and South Luffenham (2 miles east). Larger places within reach include Oakham (5 miles north-west), Uppingham (4 miles south-west), Barleythorpe (6 miles north-west), Cottesmore (7 miles north), Langham (7 miles north-west) and Whissendine (9 miles north-west).
Around Pilton
Around Pilton, we work in homes near Church of St Nicholas and the streets around them. Further afield, we also cover the area around Normanton Church Museum (2.4 miles north-east). Green spaces nearby include King's Hill.
Bath re-enamelling in Pilton without replacing anything
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. Typical jobs include wear marks under the taps and a bath in a colour that no longer suits, across cast iron baths, Victorian roll-tops and acrylic baths.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Pilton (LE15)
- Region
- Rutland
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Nearby places to Pilton
What else we do in Pilton
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Keep suction mats out of the bath
- Get any chip repaired quickly
- Stick to gentle, non-abrasive cleaners
- Do not let dyes or oils sit on the finish
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
What we do, step by step
We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes a full day. The room is left tidy.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
- Ensure the area is dry
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
What affects the price in Pilton
Resurfacing from £350. You won’t pay by the hour. The price depends on:
- The material
- How easy the damage is to reach
- How much damage there is
- The colour and finish to match
Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Your postcode, so we can check dates
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- A clear, close picture of the problem area
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Repair or replace in Pilton?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Why us?
- No extra charge for your area
- One-year guarantee on every repair
- Everything repaired in place
- Repair technicians who travel to you, UK-wide
Read our full price list or guide to resurfacing and replacement costs.
Common problems we fix in Pilton
Hard water speeds up the wear, and abrasive cleaners do the most damage.
If you can see any of these, send us a photo:
- A roll-top that’s seen better days
- Enamel that is lost its shine and feels rough
- Thin, worn enamel in places
- A coloured bath you want in white
Comparing quotes
- How your room will be protected
- Whether a trained technician does the job
- How changes to the job are handled
- If travel is included in the price
When we’d advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- Plumbing leaks, which need a plumber
- A cast iron or steel bath that is cracked right through
- An acrylic bath that flexes badly underfoot
Send us pictures and we will tell you honestly.
What we work on
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Your questions about bath re-enamelling in Pilton
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Which areas do you work in?
The entire UK, including all of Rutland. Just include your postcode and we will offer you dates.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Is a repair better than a new one?
Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
About our accreditations · Every repair comes with a one-year guarantee.
