Rutland · England
Bath re-enamelling & resurfacing in Wing, Rutland
Bath re-enamelling in Wing without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- An old resurfacing that’s failing
Signs you need bath re-enamelling in Wing
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Clients generally contact us about:
- Thin, worn enamel in places
- A coloured bath you want in white
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
What your quote should include
- Who will actually do the work
- How long the guarantee is and what it covers
- How long it needs to cure
- Whether cleaning and preparation are in the price
Bath re-enamelling at your home in Wing
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. We are often asked to fix a bath that stays dull however much you clean it and wear marks under the taps, on basins & shower trays, cast iron baths and acrylic baths.
Every job is backed for twelve months in Wing and everywhere else. We return to put right any problem with the work.
- Area
- Wing (LE15)
- County
- Rutland
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Wing: your questions answered
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and you’ll get one combined price.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
What if the damage is worse than the photos show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
How long is the bath unusable?
One day for most baths, ready the next day. We give you timings with the quote.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Also in Wing
Wing and nearby
Wing is about 4 miles south-east of Oakham, in Rutland. Customers in Wing get the same service as everywhere else we cover: a fixed price from your photos, then a visit to do the work. We work in 47 places in Rutland, from the larger towns to small villages. Our jobs stretch from Wing to Birmingham (52 miles away).
Every address in LE15 is covered, from the main roads to the quietest streets. Local streets include The Jetty, Church Street and Middle Street. Neighbouring places we cover include Manton (1 mile north-west), Lyndon (1 mile north-east), Pilton (1 mile east), Edith Weston (3 miles north-east) and North Luffenham (3 miles east). Larger places within reach include Oakham (4 miles north-west), Uppingham (3 miles south-west), Barleythorpe (5 miles north-west), Cottesmore (7 miles north), Langham (6 miles north-west) and Whissendine (8 miles north-west).
What’s near Wing
We visit homes around Kings Arms Public House and Church of St Peter and St Paul. For rail, the closest station is Oakham station, roughly 4.3 miles north-west of the centre. Further afield, we also cover the area around Normanton Church Museum (3.2 miles north-east). Not far away are King's Hill.
The process
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for the best part of a day. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the next day.
Getting ready for the visit
- Point us to the nearest place to park
- Have a window or extractor fan available
- Keep pets and children out of the room while we work
Get a quote
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Store bottles off the bath
- Get any chip repaired quickly
- Wash away dyes and oils after use
- A dripping tap should be fixed promptly
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
What we can’t put right
In fairness, there are a few things a repair won’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we will tell you honestly before booking.
What we work on
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Landlords, letting agents and housing providers in Wing use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- What kind of damage it is
- Previous DIY repairs that have to come out
- The material
- The size and number of damaged areas
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what we find most useful:
- Details of any past repairs
- A coin beside the damage so we can judge size
- Any details about the material
- The postcode, so we can plan the visit
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed price back. There is no charge for the quote and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
