Hertfordshire · England
Bath Re-enamelling in Westwick Row
Full bath re-enamelling and resurfacing in Westwick Row, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- Thin, worn enamel in places
How we handle bath re-enamelling in Westwick Row
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. We’re often asked to fix thin, worn enamel in places and enamel that’s lost its shine and feels rough, in cast iron baths, acrylic baths and pressed steel baths.
Big or small, it’s backed by a one-year guarantee in Westwick Row and across Hertfordshire.
- Where
- Westwick Row (HP2, HP3)
- Region
- Hertfordshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Prices and what affects them
Prices start from £350. You won’t pay by the hour. The price is based on:
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- Access to the area
Our prices are the same across the UK, with no extra for Westwick Row. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Quotes from your pictures
Good pictures mean an accurate price. Here’s what helps:
- Any details about the material
- Something in shot to show the size
- A wider photo showing the entire bath
- The postcode, so we can plan the visit
Upload a photo of the damage and one of the entire item, with your HP2 postcode, and we’ll come back with a fixed quote.
Aftercare tips
To keep it looking its best:
- Never use suction bath mats
- Keep toiletries on a shelf rather than in the bath
- Do not use the bath until it has fully cured
- Wipe the bath dry after use in hard water areas
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Westwick Row and the surrounding area
Westwick Row is about 2 miles east of Hemel Hempstead, in Hertfordshire. Jobs in Westwick Row are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Westwick Row is one of 381 places in Hertfordshire we cover. We work right across the region, from Westwick Row to London (about 22 miles away).
We cover every part of HP2 and HP3. From Pancake Lane, Delmar Avenue and Farm End or anywhere nearby, a technician can come to you. Nearby, we also work in Leverstock Green (1 mile west), Bennetts End (1 mile west), Pimlico (1 mile south), Adeyfield (1 mile west) and Hemel Hempstead (2 miles west). Within a short drive, we also cover Watford (6 miles south), Stevenage (15 miles north-east), St Albans (4 miles east), Welwyn Garden City (10 miles east), Harpenden (6 miles north-east) and Hitchin (15 miles north-east).
Local landmarks in Westwick Row
Locally, our jobs take us to homes close to Church of Holy Trinity, Leverstock Green Church of England Primary School and Longdean School, among other places. The nearest railway station is Apsley station, about 2.1 miles south-west of the centre. Other landmarks nearby include Village Arcade St Albans (3.4 miles east) and Hemel Hempstead Hospital (2.1 miles west). For a walk, there is Verulamium Lake and Long Deans.
Repair or replace in Westwick Row?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
Why Westwick Row clients choose us
- Generally one visit, start to finish
- Honest advice, even when it means no job
- We leave the room as we found it
- We come to you, anywhere in the UK
Take a look at our pricing and resurfacing vs replacement cost guide.
When we’d advise against a repair
A repair isn’t right for every job, including:
- A bath that is rusted through
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
If in doubt, send pictures and we’ll say what we think before booking.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Questions from Westwick Row
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before.
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
How long will the bath be out of use?
Most baths are done in a day, ready the following day. We give you timings with the quote.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you’ll get one combined price.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Work for landlords and builders
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
The process
Arrival times are agreed in advance, so you are not left guessing. On site, it takes the best part of a day. The room is left tidy and you’ll know when it can be used.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
Getting a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will say immediately if a repair is the right fix.
Advice
What we’re called out for in Westwick Row
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
It’s worth getting a quote if you see:
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
- A coloured bath you want in white
- Staining under the taps and around the waste
What your quote should include
- What the guarantee covers, and for how long
- How your room will be protected
- Whether they match the colour on site
- What happens if they find more damage
Nearby places to Westwick Row
What else we do in Westwick Row
About our accreditations · Every repair comes with a one-year guarantee.
