North Ayrshire · Scotland
Bath re-enamelling & resurfacing in Pirnmill, North Ayrshire
Bath re-enamelling for Pirnmill, without a refit. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- A coloured bath you want in white
- Several chips and rust patches
Common questions in Pirnmill
Will there be a smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
When can you do it?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
How long does re-enamelling take?
One day for most baths, ready the day after. We will confirm timings when we quote.
Do you cover Pirnmill?
Yes, we do. We send a technician to Pirnmill for every job, and the price is the same as everywhere else.
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. Then we’ll agree a date.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
Can you repair something that is been repaired before?
Typically, yes. The old repair comes out first, so mention it when you send pictures.
Bath re-enamelling in Pirnmill without replacing anything
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Common call-outs are for several chips and rust patches and staining under the taps and around the waste, on cast iron baths, Victorian roll-tops and acrylic baths.
A one-year guarantee comes as standard, so you are covered after the visit.
- Where
- Pirnmill (KA27)
- Area hub
- North Ayrshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Pirnmill
Pirnmill is about 23 miles west of Saltcoats, in North Ayrshire. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. Pirnmill is one of 53 towns and villages in North Ayrshire we cover. We work right across the region, from Pirnmill to Glasgow (about 45 miles away).
We work across the KA27 postcode area. Other places close to Pirnmill include Lochranza (6 miles north-east), Carradale (6 miles south-west), Pien (9 miles south), Shiskine (9 miles south) and Torbeg (9 miles south). For island and remote addresses, call first so we can plan the visit.
Landmarks near Pirnmill
We visit homes around Pirnmill Church Of Scotland. Green spaces nearby include Loch Tanna and Tòrr Mòr.
What else we do in Pirnmill
How to care for the repair
Much of the damage we repair could have been avoided. These habits help:
- Do not let dyes or oils sit on the finish
- Do not leave bottles, razors or sponges standing on the surface
- Fix dripping taps quickly
- Leave the bath for the full curing time before using it
A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
Signs you need bath re-enamelling in Pirnmill
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
People normally call us after spotting something like this:
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
- Several chips and rust patches
- Staining under the taps and around the waste
Comparing quotes
- What the guarantee covers, and for how long
- How to look after the finish
- Who turns up on the day
- Whether the colour is mixed to match
How we price bath re-enamelling
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- Unusual colours or finishes
- Where the damage is and how we get to it
- The type of damage
- The material
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
How to get a fixed price
You can take the photos on your phone. Just make sure we can see:
- What it’s made of, if you know
- Natural light rather than flash
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Honest limits
To be straight with you, there are a few things a repair will not fix:
- A poorly supported acrylic bath, until it’s firmed up
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
What you get with us
- Colour-matched on site
- No need to remove anything
- Honest advice, even when it means no job
- We come to you, anywhere in the UK
Read our full price list or guide to resurfacing and replacement costs.
For landlords and businesses
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
For anyone letting property in or around Pirnmill, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
How the visit works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Have a window or extractor fan available
- Point us to the nearest place to park
Getting a price
Email us a photo of the damage and one of the whole item, with your KA27 postcode, and we’ll come back with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
