North Ayrshire · Scotland

Bath re-enamelling & resurfacing in Lochranza, North Ayrshire

Bath re-enamelling for Lochranza, without a refit. Get a fixed quote from your pictures, then we come to you.

  • Resurfacing from £350
  • Stains that won’t shift
  • Lots of chips and rust spots
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Lochranza?

Lochranza and nearby

Lochranza is about 20 miles west of Saltcoats, in North Ayrshire. Jobs in Lochranza are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. We work in all 53 towns and villages in North Ayrshire. Our jobs stretch from Lochranza to Glasgow (about 41 miles away).

We cover every part of KA27 and the streets around it. From Bearlach Dearg and Newton Road or a nearby road, we can come to you. We also travel to Pirnmill (6 miles south-west), Corrie (8 miles south-east), Whitehouse (10 miles north-west), Kingarth (11 miles east) and An Tairbeart (12 miles north-west). If you are somewhere remote, call first so we can plan the visit.

What’s near Lochranza

We visit homes around Castlekirk, among other places. A little further out are Lochranza Castle (less than half a mile south). Green spaces nearby include Torr Meadhonach and Loch na Davie.

Map of Lochranza © OpenStreetMap contributors

About our bath re-enamelling in Lochranza

Resurfacing renews the entire surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. We’re frequently asked to fix a dull, rough surface that won’t come clean and staining under the taps and around the waste, in cast iron baths, basins & shower trays and pressed steel baths.

Every job is backed for twelve months. We return to put right any problem with the work.

Before and after: an old basin refinished to bright white
Location
Lochranza (KA27)
County
North Ayrshire
Warranty
12 months on all our work
Quote
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026

The process

We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a full day, and the room is left clean and tidy.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures until the following day.

Getting ready for the visit

  • Clear toiletries, mats and anything else from around the area
  • Mention any earlier repairs or resurfacing
  • Avoid using the area for a few hours before we arrive

How to get a price

Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.

Get a fixed price

Read more

Questions from Lochranza

Is my repair covered?

All our work carries a one-year guarantee. We will explain what it covers when we quote.

Do you resurface freestanding baths?

Yes. We can do the inside and outside.

How durable is a resurfaced bath?

Care for it and it lasts. Gentle cleaning, no suction mats.

Does the bath have to be removed?

Not at all. Everything is done in your bathroom, with the room protected and ventilated.

Will the price change on the day?

We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Will there be a smell?

There may be a mild smell during the work, which fades afterwards.

Can tenants book a repair?

Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.

It’s been repaired before. Can you still fix it?

Yes, we frequently do. It can add a little time, which we include in the quote.

When a repair isn’t the answer

In fairness, there are a few things a repair won’t fix:

  • Leaks from fittings rather than the bath
  • An acrylic bath that flexes badly underfoot
  • Anything hidden under an old coating, until we remove it

Send us pictures and we’ll tell you honestly before you book.

Materials we repair

  • Victorian roll-tops
  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths
  • Pressed steel baths

Landlord and trade work in Lochranza

We carry out planned and one-off repairs for housing associations and facilities teams in North Ayrshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.

Looking after it afterwards

After the repair has cured, a few habits help it last:

  • Wash away dyes and oils after use
  • Dry the bath after use to stop limescale
  • Repair dripping taps early
  • Store bottles off the bath

A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.

Repair or replace: which is better?

A replacement often means several trades over several days. Resurfacing takes one technician and generally a day, and the bath is usable the day after. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Why us?

  • Most jobs done in one visit
  • CHAS, Constructionline and SafeContractor accredited
  • We leave the room as we found it
  • Everything repaired in place

Read our prices page and guide to resurfacing and replacement costs.

Prices and what affects them

Resurfacing from £350. We do not charge extra for travel to Lochranza. The price depends on:

  • What kind of damage it is
  • What the surface is made of
  • Previous DIY repairs that have to come out
  • The size and number of damaged areas

Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

How to get a fixed price

You can generally get a fixed quote without us visiting. To help us price it:

  • A coin or ruler next to the damage for scale
  • Where you are, by postcode
  • Details of any past repairs
  • A picture taken from further back

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Different materials, different repairs

Cast iron

Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.