North Ayrshire · Scotland
Bath Re-enamelling for Corrie homes
Full bath re-enamelling and resurfacing in Corrie, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- An old resurfacing that’s failing
Bath re-enamelling at your home in Corrie
Re-enamelling is a one-day job for most baths. Nothing is disconnected or removed. Our technicians work on cast iron baths, acrylic baths and pressed steel baths, and common reasons people contact us are lots of chips and rust spots and a coloured bath you want in white.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Location
- Corrie (KA27)
- Area hub
- North Ayrshire
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Prices start from £350. There’s no area surcharge for Corrie. The price reflects:
- Any earlier repairs that need removing first
- The material and finish
- How many items we do on one visit
- What kind of damage it is
The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
How to get a fixed price
Most quotes are done from pictures alone. To help us price it:
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- A close-up of the damage, in focus
For a price in Corrie, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Other services in Corrie
Keeping it looking good
Once the work has cured, treat it gently:
- Do not let dyes or oils sit on the finish
- Respect the curing time we give you
- Keep suction mats out of the bath
- Get any chip repaired quickly
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
What we do, step by step
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Tell us if there are stairs or a lift
- Mention any parking restrictions or tricky access
- Point us to the nearest place to park
Get a quote
Most clients in Corrie get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Advice
Corrie and the surrounding area
Corrie is about 14 miles west of Saltcoats, in North Ayrshire. We visit homes and businesses in Corrie and nearby villages, so there’s no workshop to go to. We work in all 53 towns and villages in North Ayrshire, from the larger towns to small villages. Our nearest city page is Glasgow, about 37 miles away.
All of KA27 is within our area. Neighbouring places we cover include Brodick (4 miles south), Strathwhillan (4 miles south), Lamlash (7 miles south), Cordon (7 miles south) and Lochranza (8 miles north-west). Further out, we also cover Saltcoats (14 miles east), Ardrossan (13 miles east), Stevenston (15 miles east), West Kilbride (12 miles east), Auchenharvie (14 miles east) and Millport (12 miles north-east). Remote and island addresses take a little more planning, so it’s best to call first.
Landmarks near Corrie
Around Corrie, we work in homes near Corrie Hotel and Corrie Free Church. Further afield, we also cover the area around Brodick Castle (2.8 miles south) and Isle of Arran Heritage Museum (3.6 miles south).
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Common questions in Corrie
How long does re-enamelling take?
One day for most baths and can be used the day after. We give you timings with the quote.
Do you cover the whole of North Ayrshire?
Across the UK, so Corrie is covered. Our prices are the same everywhere.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. If there is more, we will tell you before starting.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, access to the room.
Someone resurfaced my bath and it’s peeling. Can you help?
Usually, yes. The old coating comes off before we resurface it. Mention it when you send pictures.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Common problems we fix in Corrie
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is generally as strong as ever.
Keep an eye out for any of the following:
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
- A coloured bath you want in white
- An old resurfacing that is failing
What to look for in a quote
- How changes to the job are handled
- A fixed price, and whether VAT is included
- What the guarantee covers, and for how long
- How long it needs to cure
Landlords, agents and businesses in Corrie
Housing associations and facilities teams use us for planned and reactive repairs in North Ayrshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
When we would advise against a repair
We will always be straight with you, so here’s what a repair will not do:
- A cast iron or steel bath that is cracked right through
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
If in doubt, send pictures and we’ll say what we think before booking.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
Why repair rather than replace?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. A repair normally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
What you get with us
- Same prices wherever you are
- CHAS, Constructionline and SafeContractor accredited
- A year’s guarantee on all work
- We come to you, anywhere in the UK
Read our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
