Essex · England

Bath re-enamelling & resurfacing in Pleshey, Essex

Bath re-enamelling for Pleshey, without a refit. Send us photos for a fixed quote, then book a visit.

  • Resurfacing from £350
  • Staining under the taps and around the waste
  • A dull, rough surface that will not come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Pleshey

How we handle bath re-enamelling in Pleshey

Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Typical jobs include stains that won’t shift and lots of chips and rust spots, in cast iron baths, pressed steel baths and basins & shower trays.

Whatever the size of the job, you get the same one-year guarantee in Pleshey and across Essex.

Location
Pleshey (CM3)
Region
Essex
Cover
A year, on every repair
Quote
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

What bath re-enamelling costs

Resurfacing from £350. You’ll know the full cost before you book. We look at:

  • What the surface is made of
  • The size and number of damaged areas
  • How hard the colour is to match
  • Previous DIY repairs that have to come out

There are no surprise extras on the day. What we quote from your pictures is what you pay, and if the damage turns out to be different, we discuss it before starting.

How to get a fixed quote

Most quotes are done from photos alone. To make it quick:

  • One sharp close-up of the damage
  • Whether it’s been repaired or coated before
  • What it’s made of, if you know
  • One picture of the entire bath

For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.

Aftercare tips

Much of the damage we repair could have been avoided. A few tips:

  • Clean with a soft cloth and mild detergent
  • Repair dripping taps early
  • Dry the bath after use to stop limescale
  • Wash away dyes and oils after use

Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.

Covering Pleshey

Pleshey is about 6 miles north-west of Chelmsford, in Essex. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We work in all 644 towns and villages in Essex. Our jobs stretch from Pleshey to London (30 miles away).

Every address in CM3 is within our area. You will find streets such as The Street, Back Lane and Woolmers Mead. Neighbouring places we cover include Ford End (2 miles north-east), Howe Street (2 miles east), Hartford End (2 miles north-east), North End (3 miles north) and Chatham Green (3 miles east). Further out, we also cover Chelmsford (6 miles south-east), Braintree (8 miles north-east), Harlow (13 miles west), Brentwood (13 miles south), Maldon (13 miles south-east) and Billericay (12 miles south).

Near you in Pleshey

Around Pleshey, we work in homes near The Leather Bottle Public House and Church of Holy Trinity and the streets around them. Further afield, we also cover the area around Broomfield Hospital (3.1 miles south-east). The countryside around Pleshey includes Little Waltham Meadows.

Map of Pleshey © OpenStreetMap contributors

When we would advise against a repair

It helps to know what we cannot do:

  • Anything hidden under an old coating, until we remove it
  • Leaking taps or wastes (a plumber’s job)
  • A metal bath with a through crack

Send us photos and we will tell you honestly.

Surfaces we repair

  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops
  • Basins & shower trays
  • Cast iron baths

How it works

Once we are through the door, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the day after.

How to prepare

  • Mention any earlier repairs or resurfacing
  • Point us to the nearest place to park
  • Keep children and pets away from the room on the day

Get a quote

You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Get a free quote

Advice

Do you need bath re-enamelling in Pleshey?

By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.

People typically call us after spotting something like this:

  • A bath that stays dull however much you clean it
  • An outdated colour you’d like to change
  • A peeling or bubbling previous coating
  • Several chips and rust patches

Questions to ask before you book

  • If travel is included in the price
  • When it can be used again
  • The length of the guarantee and what it covers
  • Whether the price is fixed and includes VAT

How to compare quotes

DIY repairs versus a professional job

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

Materials and what they mean for the repair

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, and the outside can be refinished too.

For landlords and businesses

Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.

Housing associations and facilities teams use us for planned and reactive repairs in Essex and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

Pleshey: your questions answered

Does re-enamelling smell?

Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.

Do the materials smell?

A little, depending on the job. Open windows and an extractor fan help.

What information do you need?

Use the quote form or ring 0345 017 0787.

Does someone need to be in?

Yes. We need access to the room while we work, at a time that suits you.

What happens if you find more damage?

We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.

I’m a tenant. Can you help?

We can work for tenants, landlords or agents. Just make sure the landlord agrees.

Can I get a quote without a visit?

In nearly every case. If photos do not show enough, we’ll ask for another angle.

Can you do more than one item on the same visit?

Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.