Essex · England
Bath Re-enamelling in Ford End
Local bath re-enamelling for Ford End: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
How we handle bath re-enamelling in Ford End
Resurfacing renews the whole surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. Our repair technicians work on pressed steel baths, Victorian roll-tops and cast iron baths, and people most often call us about a coloured bath you want in white and thin, worn enamel in places.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Area
- Ford End (CM3)
- Region
- Essex
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
FAQs for Ford End
Someone resurfaced my bath and it’s peeling. Can you help?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Can you repair several things at once?
Yes, and it’s frequently cheaper. Send pictures of everything together and you’ll get one combined price.
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send pictures.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
How to care for the repair
After the repair has cured, a few habits help it last:
- A quick wipe after use keeps limescale away
- Store bottles off the bath
- Repair dripping taps early
- Clean with a soft cloth and mild detergent
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Where we work around Ford End
Ford End is about 6 miles north of Chelmsford, in Essex. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Ford End is one of 644 places in Essex we cover. We work right across the region, from Ford End to London (32 miles away).
We work across the CM3 postcode area. Jobs here include addresses on Woods Road, Pleshey Road and White Barns. With the B1008 close by, Ford End is easy for our repair technicians to reach. If you are just outside Ford End, we cover Hartford End (1 mile north-east), North End (1 mile north-west), Pleshey (2 miles south-west), Causeway End (2 miles north) and Howe Street (2 miles south-east). Larger places within reach include Chelmsford (6 miles south), Braintree (7 miles north-east), Harlow (14 miles west), Brentwood (15 miles south), Maldon (13 miles south-east) and Billericay (14 miles south).
Near you in Ford End
Locally, our jobs take us to homes close to Ford End Church of England Primary School, The Butchers Arms Public House and Church of St John the Evangelist, among other places. Further afield, we also cover the area around Broomfield Hospital (3.8 miles south-east). Green spaces nearby include Phyllis Currie Nature Reserve.
Landlord and trade work in Ford End
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
Prices and what affects them
Resurfacing from £350. We give every job a fixed price from photos. This is what makes a difference:
- Previous DIY repairs that have to come out
- The material and finish
- The size and number of damaged areas
- What kind of damage it is
The price reflects the work involved, not where you live. You will see the full price before you book, with nothing added on the day.
Quotes from your pictures
You can take the photos on your phone, there is no need for anything special. Just make sure we can see:
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- A coin beside the damage so we can judge size
- A photo taken from further back
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote the same day in most cases.
When to call us in Ford End
Often the bath has just had decades of use. Underneath, a cast iron or steel bath is normally as strong as ever.
Signs it’s time to call us include:
- Chips and rust in more than one place
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
What to look for in a quote
- What the guarantee covers, and for how long
- Whether cleaning and preparation are in the price
- If travel is included in the price
- How soon you can use it again
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why us?
- A fixed quote before you book
- Nothing taken out or refitted
- Most jobs done in one visit
- Rooms protected and left tidy
Read our full price list or bath cost comparison.
Towns and villages near Ford End
More services for Ford End
Honest limits
In fairness, some problems need a different fix:
- Steel that has corroded right through
- Problems we can’t see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
The process
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to the best part of a day, including clearing up.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Open a window if you can
- Let us know which floor the room is on
- Tell us about any previous repairs or coatings
Get a quote
Most customers in Ford End get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
About our accreditations · Every repair comes with a one-year guarantee.
