Buckinghamshire · England
Bath Re-enamelling in Pond Park
Bath re-enamelling in Pond Park without the cost of replacing. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
About our bath re-enamelling in Pond Park
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for wear marks under the taps and a period or roll-top bath worth keeping, across acrylic baths, cast iron baths and pressed steel baths.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Pond Park (HP5)
- Region
- Buckinghamshire
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we do, step by step
There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to the best part of a day, tidy-up included.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
Get a quote
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
When we’d advise against a repair
A repair is not right for every job, including:
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
- A cast iron or steel bath that is cracked right through
Send us photos and we’ll tell you honestly.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Common questions in Pond Park
Do you cover the whole of Buckinghamshire?
Everywhere in the UK, Pond Park included. There’s no extra charge for travel.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
How long does re-enamelling take?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. If there is more, we will tell you before starting.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Landlord and trade work in Pond Park
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
For anyone letting property in or around Pond Park, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
Towns and villages near Pond Park
Also in Pond Park
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
Where we work around Pond Park
Pond Park is about 1 mile north of Chesham, in Buckinghamshire. Jobs in Pond Park are booked in like any other job: a fixed quote from photos, then a visit to do the work. Pond Park is one of 263 places in Buckinghamshire we cover. Our nearest city page is London, about 27 miles away.
We cover every part of the HP5 postcode area and the streets around it. Streets in the area include Vale Road, Cowper Road and Milton Road. With the A416 close by, Pond Park is simple for us to get to. We also cover the places around Pond Park: Chesham (1 mile south), Asheridge (1 mile north-west), Chartridge (1 mile west), Bellingdon (2 miles north-west) and Hundridge (2 miles south-west). Within a short drive, we also cover Aylesbury (11 miles north-west), High Wycombe (9 miles south-west), Marlow (12 miles south-west), Amersham (3 miles south), Beaconsfield (8 miles south) and Chalfont St Peter (8 miles south).
Landmarks near Pond Park
Locally, our jobs take us to homes close to Nash Arms, Chiltern Hills Academy and Ivingswood Academy, among other places. The closest station to Pond Park is Amersham station, roughly 3.1 miles south. A little further out are Hawridge Court (1.7 miles north) and Amersham Fair Organ Museum (2.9 miles south). For a walk, there’s Sands Bank and Pavis Wood.
What affects the price in Pond Park
Resurfacing from £350. A fixed quote means you know the cost before booking. We take into account:
- Previous DIY repairs that have to come out
- The material and finish
- How much damage there is
- The type of damage
A repair usually costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Send photos for a quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- Details of any past repairs
- One picture of the entire bath
- Something in shot to show the size
- A close-up of the damage, in focus
To get a price, send a couple of pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
Keeping it looking good
How the surface is treated afterwards matters:
- A dripping tap should be fixed promptly
- Stick to gentle, non-abrasive cleaners
- Wash away dyes and oils after use
- Don’t leave bottles, razors or sponges standing on the surface
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Common problems we fix in Pond Park
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Typical reasons for a call-out include:
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
- Brown or grey marks that do not clean off
Questions to ask before booking
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
- A fixed price, and whether VAT is included
- What protection goes down before work starts
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
