Bridgend · Wales
Bath Re-enamelling in Pont-y-rhyl
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Pont-y-rhyl. Send photos for a free, fixed quote.
- Resurfacing from £350
- Lots of chips and rust spots
- Worn patches where water runs and sits
Bath re-enamelling in Pont-y-rhyl without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Our technicians work on Victorian roll-tops, basins & shower trays and cast iron baths, and the jobs we see most are worn patches where water runs and sits and an original cast iron bath that needs restoring.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Pont-y-rhyl (CF32)
- Area hub
- Bridgend
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
About Pont-y-rhyl
Pont-y-rhyl is about 3 miles east of Maesteg, in Bridgend. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Pont-y-rhyl is one of 91 places in Bridgend we cover.
Jobs in CF32 work the same way as everywhere else we cover. Whether you live on West Rhonnda, Station Row and Garwfechan Road or anywhere nearby, we can come to you. Pont-y-rhyl is on the A4064, which makes it straightforward to reach. Neighbouring places we cover include Llangeinor (1 mile south), Bettws (1 mile south), Pant-yr-Awel (2 miles south-east), Lewistown (2 miles east) and Blackmill (2 miles south-east). Further out, we also cover Bridgend (6 miles south), Maesteg (3 miles west), Porthcawl (9 miles south-west), Newcastle Higher (6 miles south), Ynysawdre (3 miles south) and Pencoed (6 miles south-east).
Near you in Pont-y-rhyl
Typical jobs here are in homes near Braichycymmer Hotel and Ffaldau Primary School, among other places. The closest station to Pont-y-rhyl is Garth (Mid Glamorgan) station, roughly 2.7 miles west of the centre. Further afield, we also cover the area around Moel Garn (1.3 miles north) and Maesteg Community Hospital (4 miles west). For a walk, there’s Craig-yr-hudol.
Landlord and trade work in Pont-y-rhyl
If you manage property in Pont-y-rhyl, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- How many areas need work
- What kind of damage it is
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed quote
Photographing the damage takes a minute, and it saves a visit. Please include:
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- Any details about the material
- Your postcode, so we can check dates
Most customers in Pont-y-rhyl get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Do you need bath re-enamelling in Pont-y-rhyl?
Many baths we resurface have simply been well used. The body of the bath is usually perfectly sound.
If you can see any of these, send us a photo:
- Wear marks under the taps
- A dull, rough surface that won’t come clean
- A peeling or bubbling previous coating
- Stains that will not shift
Comparing quotes
- Whether there are any call-out or travel charges
- Whether the colour is mixed to match
- Who will actually do the work
- When it can be used again
How it works
Your technician turns up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. Most visits take the best part of a day, and the room is left clean and tidy.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
- Mention any parking restrictions or tricky access
How to get a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Related advice
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Can I fix it myself?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Also near Pont-y-rhyl
More services for Pont-y-rhyl
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Wash away dyes and oils after use
- Do not leave bottles, razors or sponges standing on the surface
- Wipe the bath dry after use in hard water areas
- Fix dripping taps quickly
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Repair or replace: which is better?
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Prices start from £350. Our prices are the same across the UK, with no extra for Pont-y-rhyl. The job itself decides the price: how much damage, what it’s made of and how many items.
Why Pont-y-rhyl clients choose us
- Straight answers about what a repair can do
- Work done at your home or business
- Normally one visit, start to finish
- CHAS and Constructionline accredited
See our prices page or guide to resurfacing and replacement costs.
Pont-y-rhyl: your questions answered
Is it OK to have pets in the house?
Just keep them out of the work area. We will tell you when the room can be used again.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Do you cover the entire of Bridgend?
We cover the entire UK, including Pont-y-rhyl and the rest of Bridgend. Send your postcode with your pictures and we will offer you dates.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Do the materials smell?
There can be some smell while we work, so we ventilate the room. It clears as the materials cure.
About our accreditations · Every repair comes with a one-year guarantee.
