Leicestershire · England
Bath Re-enamelling in Potters Marston
Damaged bath in Potters Marston? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
Bath re-enamelling in Potters Marston without replacing anything
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. Whether it’s thin, worn enamel in places and a peeling or bubbling previous coating, we can help.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Potters Marston (LE9)
- Region
- Leicestershire
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Potters Marston
We work for landlords, letting agents and housing providers in Potters Marston as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Signs you need bath re-enamelling in Potters Marston
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Most people get in touch when they notice one of these:
- Lots of chips and rust spots
- Enamel that’s lost its shine and feels rough
- A coloured bath you want in white
- A peeling or bubbling previous coating
What your quote should include
- What prep work is covered
- What happens if they find more damage
- How soon you can use it again
- How to look after the finish
Why repair rather than replace?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Prices start from £350. The price reflects the work involved, not your postcode. You will see the full price before you book.
What you get with us
- We leave the room as we found it
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before booking
- Nothing taken out or refitted
Read our pricing and resurfacing vs replacement cost guide.
The process
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes the best part of a day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Let us know if it has been repaired before
- Have a window or extractor fan available
- Mention if the room is upstairs or in a flat
Get a quote
Send us a picture of the damage and a wider shot of the entire item, and tell us you’re in Potters Marston, and we’ll reply with a fixed price.
Read more
What affects the price in Potters Marston
Prices start from £350. We do not charge extra for travel to Potters Marston. The price depends on:
- How easy the damage is to reach
- How hard the colour is to match
- Any earlier repairs that need removing first
- The material
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- One picture of the entire bath
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.
Places near Potters Marston
What else we do in Potters Marston
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Common questions in Potters Marston
Do you come to Potters Marston?
Yes. We work across the UK and come to Potters Marston and the rest of Leicestershire. Send pictures and we will quote, or call 0345 017 0787.
I’m a tenant. Can you help?
Of course. Check with your landlord; we can send the quote to them too.
What happens after I send pictures?
We review the pictures and send a fixed quote with dates.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Is my repair covered?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send photos.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
How to look after the repair
Looking after the surface is easy, and it makes a real difference:
- Do not use the bath until it has fully cured
- Keep suction mats out of the bath
- Do not leave bottles, razors or sponges standing on the surface
- Do not let dyes or oils sit on the finish
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Potters Marston and the surrounding area
Potters Marston is about 2 miles east of Earl Shilton, in Leicestershire. Book a date that suits you, and you will know when to expect us, so there is no waiting around. We cover 287 places across Leicestershire, from the larger towns to small villages. Our jobs stretch from Potters Marston to Birmingham (27 miles away).
Every address in LE9 is within our area, from the main roads to the quietest streets. We also cover the places around Potters Marston: Croft (1 mile south-east), Stoney Stanton (1 mile south-west), Huncote (1 mile north-east), Thurlaston (2 miles north) and Sutton in the Elms (2 miles south-east). Larger places within reach include Loughborough (14 miles north), Hinckley (5 miles west), Wigston (7 miles east), Coalville (12 miles north), Shepshed (14 miles north) and Syston (12 miles north-east).
Local landmarks in Potters Marston
We visit homes around Heathcote Arms, Church of St Mary and Croft Church of England Primary School, among other places. The nearest railway station is Narborough station, about 2.6 miles east of the centre. Not far away are Croft Hill and Stoney Cove.
About our accreditations · Every repair comes with a one-year guarantee.
