Leicestershire · England

Bath re-enamelling & resurfacing in Thurlaston, Leicestershire

Damaged bath in Thurlaston? We put it right where it is, mix the colour on the day and guarantee the work for a year.

  • Resurfacing from £350
  • An old resurfacing that is failing
  • A dull, rough surface that won’t come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Thurlaston?

Bath re-enamelling in Thurlaston, done in place

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Typical jobs include a bath that stays dull however much you clean it and staining under the taps and around the waste, in pressed steel baths, cast iron baths and acrylic baths.

Big or small, it’s backed by a one-year guarantee.

Location
Thurlaston (LE9)
County
Leicestershire
Warranty
12 months on all our work
Quote
From £350. Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026
Stained basin resurfaced to clean white (before and after)

About Thurlaston

Thurlaston is about 6 miles north-east of Hinckley, in Leicestershire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Thurlaston is one of 287 towns and villages in Leicestershire we cover. Our nearest city page is Birmingham, about 28 miles away.

Our technicians cover all of the LE9 postcode area. We regularly work on streets such as Main Street, Church Street and All Saints Close. If you’re just outside Thurlaston, we cover Huncote (1 mile south-east), Potters Marston (2 miles south), Enderby (2 miles east), Narborough (2 miles south-east) and Croft (2 miles south). Further out, we also cover Loughborough (13 miles north), Hinckley (6 miles south-west), Wigston (6 miles east), Coalville (10 miles north-west), Ashby-de-la-Zouch (14 miles north-west) and Shepshed (13 miles north).

What’s near Thurlaston

Around Thurlaston, we work in homes near Thurlaston Church of England Primary School, Elephant & Castle pub and Brockington College, among other places. Thurlaston’s nearest station is Narborough station, roughly 2.6 miles south-east. Further afield, we also cover the area around Fosse Shopping Park (3.5 miles east) and Kirby Muxloe Castle (3.7 miles north). Not far away are Croft Hill and Stoney Cove.

Map of Thurlaston © OpenStreetMap contributors

When we’d advise against a repair

In fairness, there are a few things a repair will not fix:

  • A poorly supported acrylic bath, until it’s firmed up
  • A cast iron or steel bath that’s cracked right through
  • Leaks from fittings rather than the bath

Send us pictures and we will tell you honestly before you book.

Surfaces we repair

  • Basins & shower trays
  • Victorian roll-tops
  • Pressed steel baths
  • Acrylic baths
  • Cast iron baths

DIY kit or professional repair?

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

Landlord and trade work in Thurlaston

We carry out planned and one-off repairs for housing associations and facilities teams in Leicestershire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

What your bath is made of matters

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.

Keeping it looking good

Simple care helps the repair last. We recommend:

  • Fix dripping taps quickly
  • Get any chip repaired quickly
  • Dry the bath after use to stop limescale
  • Store bottles off the bath

A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.

The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

Your questions about bath re-enamelling in Thurlaston

What if the damage is worse than the photos show?

We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.

Will it make a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Is my repair covered?

All our work carries our one-year guarantee. We will explain what it covers when we quote.

Do you need to take the bath out?

No. It’s re-enamelled where it stands, so the tiles and taps stay put.

Do you charge for travel?

There is no separate call-out charge. The fixed price covers the visit and the work.

Is a repair better than a new one?

Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you resurface freestanding baths?

Yes. We can do the inside and outside if you’d like.

Do you need bath re-enamelling in Thurlaston?

Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.

Contact us if you’ve noticed any of these:

  • An old resurfacing that’s failing
  • An outdated colour you’d like to change
  • Several chips and rust patches
  • A roll-top that is seen better days

Before you book anyone

  • Whether cleaning and preparation are in the price
  • How long it needs to cure
  • Who will actually do the work
  • How long the guarantee is and what it covers

How to compare quotes

What affects the price in Thurlaston

Prices start from £350. We do not charge extra for travel to Thurlaston. The price comes down to:

  • Where the damage is and how we get to it
  • Whether old repairs or coatings need taking off
  • What kind of damage it is
  • The colour and finish to match

A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with no extras added later.

Quotes from your pictures

Most quotes are done from photos alone. To help us price it:

  • Whether it’s been repaired or coated before
  • Any details about the material
  • The postcode, so we can plan the visit
  • A coin or ruler next to the damage for scale

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.

What happens on the day

On the day itself, there is little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take most of the day.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

How to prepare

  • Have somewhere for us to park nearby if possible
  • Let us know if it has been repaired before
  • Plan for the room to be out of bounds to pets and children

How to get a price

You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Get a fixed price

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.