Scottish Borders · Scotland
Bath re-enamelling & resurfacing in Preston, Scottish Borders
Bath re-enamelling in and around Preston: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Stains that will not shift
Bath re-enamelling in Preston without replacing anything
We re-enamel a lot of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We work on acrylic baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are a bath in a colour that no longer suits and thin, worn enamel in places.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Preston (TD11)
- Region
- Scottish Borders
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Honest limits
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- Holes rusted through the metal
- Problems we cannot see until an old finish comes off
- A cast iron or steel bath that’s cracked right through
Send us photos and we will tell you honestly.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
Nearby places to Preston
What else we do in Preston
Common problems we fix in Preston
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Typical reasons for a call-out include:
- Wear marks under the taps
- Lots of chips and rust spots
- Brown or grey marks that don’t clean off
- A peeling or bubbling previous coating
Comparing quotes
- A fixed price, and whether VAT is included
- How long the guarantee is and what it covers
- What aftercare is recommended
- When it can be used again
Preston and nearby
Preston is about 13 miles west of Berwick-upon-Tweed, in the Scottish Borders. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Our repair technicians cover all 89 towns and villages across the Scottish Borders, from the larger towns to small villages. Our jobs stretch from Preston to Edinburgh (about 35 miles away).
Every address in TD11 is covered. Other places close to Preston include Duns (2 miles south), Clockmill (3 miles south-west), Gavinton (3 miles south-west), Chirnside (5 miles east) and Grantshouse (5 miles north).
Landmarks near Preston
In Preston, that means homes near Preston Church and the streets around them. Further afield, we also cover the area around Knoll Hospital (2.5 miles south) and Cockburn Tower (1.7 miles north-west). Green spaces nearby include Duns Castle nature reserve and Duns Law.
Common questions in Preston
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Is repairing better than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Do you resurface freestanding baths?
Yes. Inside and out.
Can you repair something that is been repaired before?
In most cases. We remove the old repair before doing a new one.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
How long is the bath unusable?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Should you replace it?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- No extra charge for your area
- Normally one visit, start to finish
- Technicians who travel to you, UK-wide
- Every repair guaranteed for a year
Take a look at our full price list and resurfacing vs replacement cost guide.
Landlord and trade work in Preston
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
How we price bath re-enamelling
Resurfacing from £350. There’s no area surcharge for Preston. What changes the price is:
- What kind of damage it is
- Whether we combine several jobs
- Any earlier repairs that need removing first
- The material
There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
Good photos mean an accurate price. Here’s what helps:
- A wider photo showing the whole bath
- One sharp close-up of the damage
- Natural light rather than flash
- A coin beside the damage so we can judge size
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and you’re under no obligation.
Aftercare tips
Aftercare is simple:
- Repair dripping taps early
- Wipe the bath dry after use in hard water areas
- Stick to gentle, non-abrasive cleaners
- Keep toiletries on a shelf rather than in the bath
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
How the visit works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
Getting a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
