East Ayrshire · Scotland
Bath Re-enamelling in Priestland
Local bath re-enamelling for Priestland: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An old resurfacing that’s failing
- An outdated colour you’d like to change
Where we work around Priestland
Priestland is about 9 miles east of Kilmarnock, in East Ayrshire. Wherever you are in the KA17 postcode area, we come to you. Priestland is one of 53 places in East Ayrshire where we work. We work right across the region, from Priestland to Glasgow (about 17 miles away).
Jobs in KA17 are booked in the same way as anywhere else. We also cover the places around Priestland: Darvel (1 mile west), Newmilns (3 miles west), Drumclog (4 miles east), Galston (5 miles west) and Moscow (6 miles west). Further out, we also cover Kilmarnock (9 miles west), Stewarton (11 miles north-west), Cumnock (11 miles south), Annanhill (10 miles west), Mauchline (8 miles south-west) and New Farm Loch (8 miles west).
Around Priestland
Locally, our jobs take us to homes close to Darvel Central Church. A little further out are Cessnock Castle (4.3 miles west). The countryside around Priestland includes Distinkhorn and Loch Gate.
Bath re-enamelling in Priestland without replacing anything
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We are often asked to fix staining under the taps and around the waste and an outdated colour you’d like to change, on cast iron baths, pressed steel baths and basins & shower trays.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Priestland (KA17)
- Region
- East Ayrshire
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes a full day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Keep pets and children out of the room while we work
- Ensure the room can be ventilated
- Move bottles, mats and clutter away from the area
Getting a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Read more
How to look after the repair
So the finish stays in good condition:
- A dripping tap should be fixed promptly
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
- Wash away dyes and oils after use
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Honest limits
To be straight with you, there are a few things a repair will not fix:
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Other services in Priestland
Why repair rather than replace?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Our bath re-enamelling starts from £350. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it.
What you get with us
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
- No need to remove anything
- Colour mixed on the day to match
See our full price list and bath cost comparison.
What we’re called out for in Priestland
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Customers generally contact us about:
- Thin, worn enamel in places
- Lots of chips and rust spots
- Staining under the taps and around the waste
- A dull, rough surface that will not come clean
Comparing quotes
- Who will actually do the work
- What prep work is covered
- Is the price fixed, and does it include VAT?
- How to care for the finish
For landlords and businesses
We work for landlords, letting agents and housing providers in Priestland as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.
Priestland: your questions answered
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
What if the damage is worse than the pictures show?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.
Someone resurfaced my bath and it’s peeling. Can you help?
Normally, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
What areas do you cover?
Across the UK, so Priestland is covered. Our prices are the same everywhere.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Send pictures of everything together and we will quote them together.
About our accreditations · Every repair comes with a one-year guarantee.
