Tameside · England
Bath re-enamelling & resurfacing in Quick, Tameside
Bath re-enamelling in and around Quick: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Enamel that is lost its shine and feels rough
How we handle bath re-enamelling in Quick
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. We regularly repair pressed steel baths, cast iron baths and basins & shower trays, and common reasons people get in touch are staining under the taps and around the waste and a coloured bath you want in white.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Quick (OL5, OL4)
- Area hub
- Tameside
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Quick
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Look out for these signs:
- A peeling or bubbling previous coating
- A roll-top that is seen better days
- Wear marks under the taps
- Staining under the taps and around the waste
Questions to ask before booking
- Whether the colour is mixed to match
- Whether the price is fixed and includes VAT
- What prep work is covered
- What happens if they find more damage
When we would advise against a repair
A few problems are outside what a surface repair can do:
- Problems we cannot see until an old finish comes off
- An acrylic bath that flexes badly underfoot
- A cast iron or steel bath that’s cracked right through
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Quick questions
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed price includes everything.
Can you repair something that’s been repaired before?
Yes, we frequently do. It can add a little time, which we include in the quote.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Do you work in Quick?
We do. We send a technician to Quick for every job, and the price is the same as everywhere else.
How to care for the repair
After the repair has cured, a few habits help it last:
- Use washing-up liquid and a soft cloth
- Wipe the bath dry after use in hard water areas
- Do not leave a chip unrepaired
- Avoid suction-cup mats
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
How it works
On the day itself, there is little for you to do. Let us in and show us the room, and we will take it from there. Most visits take a full day, tidy-up included.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
How to prepare
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
- Point us to the nearest place to park
Get a quote
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
Towns and villages near Quick
Other services in Quick
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Quick and nearby
Quick is about 1 mile south-east of Lees, in Tameside. Our technicians come to homes and businesses in Quick and nearby villages, so nothing has to leave your home. Our repair technicians cover all 32 towns and villages across Tameside. We work right across the region, from Quick to Manchester (8 miles away).
All of OL5 and OL4 is covered. Whether you live on Quick Road, Mossley Road and Midge Hill or anywhere nearby, we can come to you. Neighbouring places we cover include Lydgate (1 mile north), Grasscroft (1 mile north-east), Grotton (1 mile north-west), Friezland (1 mile north-east) and Mossley (1 mile south). Larger places within reach include Ashton-under-Lyne (3 miles south-west), Denton (6 miles south-west), Hyde (6 miles south), Stalybridge (3 miles south), Droylsden (5 miles south-west) and Dukinfield (4 miles south-west).
Near you in Quick
Typical jobs here are in homes near Friezland Primary School, Mossley Hollins High School and Church of St John the Baptist and the streets around them. Also close by are White Hart Public House (0.5 miles north) and St Chad's House (1.8 miles north-east). Quick’s nearest station is Mossley (Manchester) station, about 1 mile south of the centre. Well-known places in the area include Mossley (0.9 miles south) and Tameside General Hospital (2.8 miles south-west). Green spaces nearby include Alphin and Eastwood Nature Reserve.
Landlords, agents and businesses in Quick
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
What affects the price in Quick
Prices start from £350. We charge the same across the UK, including Quick. The price reflects:
- Unusual colours or finishes
- The material and finish
- How much damage there is
- Any earlier repairs that need removing first
What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Quotes from your pictures
Two or three clear photos are generally enough. Try to include:
- Where you are, by postcode
- Details of any past repairs
- Daylight if possible, and no flash reflection
- A photo taken from further back
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
