Cheshire East · England
Bath re-enamelling & resurfacing in Radnor, Cheshire East
Bath re-enamelling for Radnor, without a refit. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Stains that won’t shift

What we are called out for in Radnor
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is normally perfectly sound.
These are the problems we are asked about most:
- Worn patches where water runs and sits
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
- A dull, rough surface that will not come clean
Comparing quotes
- What happens if they find more damage
- How long the guarantee is and what it covers
- Whether a trained technician does the job
- How the room is protected while they work
About our bath re-enamelling in Radnor
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s enamel that’s lost its shine and feels rough and a roll-top that’s seen better days, we can help, on basins & shower trays, Victorian roll-tops and acrylic baths alike.
All of our repairs are guaranteed for twelve months in Radnor and everywhere else. If something goes wrong with the work, we come back.

- Location
- Radnor (CW12)
- Region
- Cheshire East
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Our work in Radnor
Radnor is about 2 miles west of Congleton, in Cheshire East. Our technicians come to clients in Radnor and nearby villages, so there’s no workshop to go to. We work in all 254 towns and villages across Cheshire East. Our nearest city page is Manchester, about 21 miles away.
Postcode districts we cover here: CW12. From Wellingtonia Drive, Blue Cedar Way and Black Firs Lane or a nearby road, a technician can come to you. We also cover the places around Radnor: Somerford Booths (1 mile north), Hulme Walfield (1 mile north-east), West Heath (1 mile south-east), Newsbank (1 mile north) and Brereton Heath (1 mile west). We also work in nearby towns such as Crewe (10 miles south-west), Macclesfield (8 miles north-east), Wilmslow (11 miles north), Nantwich (13 miles south-west), Knutsford (10 miles north-west) and Middlewich (8 miles west).
Landmarks near Radnor
Our customers here include homes close to Black Firs Primary School, Congleton High School and St Michael's Church and the streets around them. The nearest railway station is Congleton station, roughly 2.7 miles south-east of the centre. Nearby you’ll also find Mow Cop Castle (4.5 miles south). Open spaces near Radnor include Black Firs Wood Nature Reserve and Astbury Mere.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Keeping it looking good
To keep it looking its best:
- Have chips seen to early
- Dry the bath after use to stop limescale
- Wash away dyes and oils after use
- Fix dripping taps quickly
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What we cannot put right
Some jobs are not right for a repair, for example:
- Problems we cannot see until an old finish comes off
- Leaking taps or wastes (a plumber’s job)
- A metal bath with a through crack
Send us photos and we will tell you honestly before you book.
Surfaces we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Towns and villages near Radnor
More services for Radnor
Should you replace it?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before you book.
Why choose Surface Doctor in Radnor
- Usually one visit, start to finish
- Every repair guaranteed for a year
- Fixed prices from your photos
- Colour mixed on the day to match
Read our pricing and guide to resurfacing and replacement costs.
Landlord and trade work in Radnor
We work for landlords, letting agents and housing providers in Radnor as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes most of the day. We tidy up before we leave and let you know when you can use it again.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Keep a parking space free if you can
- Keep pets and children out of the room while we work
- Tell us if there are stairs or a lift
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Read more
FAQs for Radnor
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
What happens once I’ve sent photos?
You will get a fixed quote back, normally with dates to choose from. There’s no obligation to book.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
What do you need from me?
Send photos through the quote form or call 0345 017 0787.
About our accreditations · Every repair comes with a one-year guarantee.

