Cheshire East · England
Bath re-enamelling & resurfacing in Somerford, Cheshire East
Bath re-enamelling in Somerford without the cost of replacing. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- A coloured bath you want in white
- Staining under the taps and around the waste
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Somerford. The price reflects:
- How many areas need work
- Whether old repairs or coatings need taking off
- Doing more than one item at once
- What kind of damage it is
The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before booking.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what helps:
- Something in shot to show the size
- Where you are, by postcode
- Daylight if possible, and no flash reflection
- A picture taken from further back
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote without visiting.
Bath re-enamelling in Somerford without replacing anything
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, with the bath ready to use the following day. Typical jobs include stains that won’t shift and a peeling or bubbling previous coating, in cast iron baths, pressed steel baths and Victorian roll-tops.
A one-year guarantee comes as standard.
- Where
- Somerford (CW12)
- Region
- Cheshire East
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
How the visit works
There’s not much you need to do on the day. Let us in and show us the room, and we’ll get on with it. The job generally runs to the best part of a day, tidy-up included.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Clear the area around the damage
- Mention any earlier repairs or resurfacing
- Let the surface dry out before the visit
How to get a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Related advice
Somerford and nearby
Somerford is about 4 miles west of Congleton, in Cheshire East. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. We work in all 254 towns and villages in Cheshire East, from the larger towns to small villages. You can also see our page for Manchester, about 21 miles away.
Jobs in CW12 work the same way as everywhere else we cover. You will find streets such as Holmes Chapel Road, Woodpecker Place and Broomfield, all of which we cover. Close by, we cover Brereton Heath (1 mile south-east), Davenport (1 mile north-west), Smethwick Green (1 mile south), Somerford Booths (1 mile east) and Radnor (2 miles east). Within a short drive, we also cover Crewe (9 miles south-west), Macclesfield (9 miles north-east), Congleton (4 miles east), Wilmslow (11 miles north), Nantwich (12 miles south-west) and Knutsford (9 miles north).
Local landmarks in Somerford
Around Somerford, we work in homes near Congleton High School and All Saints Chapel, among other places. For rail, the closest station is Holmes Chapel station, roughly 2.8 miles north-west. Open spaces near Somerford include Swettenham Meadows Nature Reserve and Astbury Mere.
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We work for landlords, letting agents and housing providers in Somerford as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Questions from Somerford
Do the materials smell?
Expect a mild smell while we’re working.
I rent my home. Can I book you?
Yes. Ask your landlord first, and we can send them the quote if that helps.
What do you need from me?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Can pets and children be at home?
Just keep them out of the work area. We will let you know when it’s safe to use again.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Repair or replace: which is better?
A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, and the bath can be used the day after. Prices start from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Somerford clients choose us
- One price list for the whole UK
- CHAS and Constructionline accredited
- Colour-matched on site
- Repair technicians who travel to you, UK-wide
Read our pricing and bath cost comparison.
When to call us in Somerford
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Signs it’s time to call us include:
- An outdated colour you’d like to change
- Wear marks under the taps
- A coating lifting around the plughole
- Chips and rust in more than one place
Questions to ask before booking
- What happens if they find more damage
- When it can be used again
- How long the guarantee is and what it covers
- How the colour is matched
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
What we cannot put right
It helps to know what we cannot do too:
- Acrylic that moves when you stand in it
- Anything hidden under an old coating, until we remove it
- Steel that has corroded right through
Send us photos and we will tell you honestly.
Materials we work on in Somerford
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Towns and villages near Somerford
More services for Somerford
About our accreditations · Every repair comes with a one-year guarantee.
