Cambridgeshire · England
Bath re-enamelling & resurfacing in Ramsey Mereside, Cambridgeshire
Full bath re-enamelling and resurfacing at your home in Ramsey Mereside, with a one-year guarantee on every repair.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A dull, rough surface that will not come clean
What bath re-enamelling costs
Prices start from £350. You won’t pay by the hour. The price depends on:
- How hard the colour is to match
- Whether we combine several jobs
- How much damage there is
- Whether old repairs or coatings need taking off
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from pictures
Most quotes are done from pictures alone. To make it quick:
- Any details about the material
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- Whether it’s been repaired or coated before
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
Bath re-enamelling in Ramsey Mereside, done in place
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Typical jobs include a bath in a colour that no longer suits and lots of chips and rust spots, in cast iron baths, pressed steel baths and Victorian roll-tops.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Where
- Ramsey Mereside (PE26)
- Region
- Cambridgeshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Ramsey Mereside
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is normally perfectly sound.
Send us a photo if you notice any of these:
- A coating lifting around the plughole
- Chips and rust in more than one place
- A roll-top that’s seen better days
- A bath in a colour that no longer suits
What your quote should include
- What prep work is covered
- A fixed quote, and whether VAT is included
- Who will actually do the work
- Whether the colour is mixed to match
Ramsey Mereside questions
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Do you cover Ramsey Mereside?
Yes, we do. We send a technician to Ramsey Mereside for every job, with no extra charge for travel.
How long will the bath be out of use?
One day for most baths, ready the following day. We will confirm timings when we quote.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Can you quote from pictures?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Can I add another job to the visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send photos of everything you’d like done.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we will plan for it.
When a repair is not the answer
We won’t take on work that will not last, so these are the limits:
- Steel that has corroded right through
- Leaks from fittings rather than the bath
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
About Ramsey Mereside
Ramsey Mereside is about 5 miles south of Whittlesey, in Cambridgeshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in all 371 towns and villages across Cambridgeshire. Our jobs stretch from Ramsey Mereside to London (about 68 miles away).
All of PE26 is within our area, from the main roads to the quietest streets. You’ll find streets such as Marriotts Close, Drovers Close and Marriott's Drove, and we cover them all. Close by, we cover Ramsey St Mary's (2 miles west), Ramsey (3 miles south), Ramsey Heights (3 miles south-west), Bury (3 miles south) and Upwood (4 miles south-west). Larger places within reach include Huntingdon (11 miles south), St Ives (11 miles south), March (9 miles north-east), Whittlesey (5 miles north), Chatteris (7 miles east) and Godmanchester (12 miles south).
Landmarks near Ramsey Mereside
For rail, the closest station is Whittlesea station, about 4.4 miles north. Well-known places in the area include Ramsey Rural Museum (2.6 miles south). Not far away are Ramsey Heights nature reserve.
Different materials, different repairs
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Towns and villages near Ramsey Mereside
Also in Ramsey Mereside
How it works
There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to the best part of a day, tidy-up included.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Let us know about parking or access
- Keep pets and children out of the room while we work
- Have a window or extractor fan available
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Read more
Keeping it looking good
Nothing complicated is needed, just a few sensible habits:
- Respect the curing time we give you
- Avoid suction-cup mats
- Wash away dyes and oils after use
- Store bottles off the bath
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Work for landlords and builders
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
About our accreditations · Every repair comes with a one-year guarantee.
