Cambridgeshire · England
Bath re-enamelling & resurfacing in Ramsey, Cambridgeshire
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Ramsey. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Several chips and rust patches
- Staining under the taps and around the waste
Our work in Ramsey
Ramsey is about 8 miles north of St Ives, in Cambridgeshire. From the centre of Ramsey to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Ramsey is one of 371 towns and villages in Cambridgeshire where we work. Our nearest city page is London, about 66 miles away.
Our visits in PE26 are booked in the same way as anywhere else. Local streets include Station Road, High Street and Old Station Road, and we cover them all. Being close to the B1040 and B1096, Ramsey is easy for our repair technicians to reach. Nearby, we also work in Bury (1 mile south), Ramsey Heights (2 miles west), Upwood (2 miles south-west), Wistow (3 miles south) and Ramsey Mereside (3 miles north). Within a short drive, we also cover Huntingdon (8 miles south), St Ives (8 miles south), March (11 miles north-east), Whittlesey (8 miles north), Chatteris (7 miles east) and Godmanchester (10 miles south).
Landmarks near Ramsey
Around Ramsey, we work in homes near Church of St Thomas à Becket, Jolly Sailor Public House and Abbey College. Nearby you’ll also find Ramsey Rural Museum (0.7 miles east). Not far away are Wistow Wood.
Bath re-enamelling in Ramsey, done in place
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. Our technicians work on pressed steel baths, basins & shower trays and Victorian roll-tops, and the jobs we see most are a roll-top that’s seen better days and worn patches where water runs and sits.
Big or small, you get the same one-year guarantee in Ramsey and across Cambridgeshire.
- Where
- Ramsey (PE26)
- Region
- Cambridgeshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
More services for Ramsey
How the visit works
We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. You can expect it to take the best part of a day, and we’ll keep you posted as we go.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
- Have somewhere for us to park nearby if possible
Getting a price
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.
Related advice
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Looking after it afterwards
Aftercare is simple:
- Dry the bath after use to stop limescale
- Keep suction mats out of the bath
- Get any chip repaired quickly
- Use washing-up liquid and a soft cloth
Wipe the bath dry after use where you can, and rinse off any bath products.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Landlord and trade work in Ramsey
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
When to call us in Ramsey
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
The most common problems we’re called about are:
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
Before you book anyone
- The length of the guarantee and what it covers
- Whether a trained technician does the job
- If travel is included in the price
- How the room is protected while they work
How we price bath re-enamelling
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- How many areas need work
- Doing more than one item at once
- The material and finish
- Whether it’s a chip, crack, burn or wear
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Getting a price from pictures
It only takes a minute to photograph the damage. Try to send:
- A clear, close picture of the problem area
- Daylight if possible, and no flash reflection
- What it’s made of, if you know
- Any earlier repairs or coatings
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
Your questions about bath re-enamelling in Ramsey
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Cambridgeshire.
What areas do you cover?
We cover the entire UK, including Ramsey and the rest of Cambridgeshire. Send your postcode with your pictures and we will confirm dates.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Are there extra charges for Ramsey?
No. Our quotes include travel, and we charge the same wherever you are.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Just add the extra items to your photos and you’ll get one combined price.
What happens once I’ve sent pictures?
We look at the photos and reply with a fixed quote and some dates. If we need another angle, we’ll ask.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Damage hidden under a previous coating, until it’s stripped back
- A bath split right through the body
- Acrylic that moves when you stand in it
Send us pictures and we will tell you honestly.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
