South Gloucestershire · England

Bath Re-enamelling in Rangeworthy

Local bath re-enamelling for Rangeworthy: photo quotes, tidy work and a year’s guarantee.

  • Resurfacing from £350
  • Chips and rust in more than one place
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Rangeworthy

Landlords, agents and businesses in Rangeworthy

We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.

Landlords, letting agents and housing providers in Rangeworthy use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Bath re-enamelling at your home in Rangeworthy

Resurfacing renews the entire surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. We regularly repair acrylic baths, Victorian roll-tops and pressed steel baths, and the jobs we see most are a bath in a colour that no longer suits and thin, worn enamel in places.

You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.

Before and after: an old basin refinished to bright white
Location
Rangeworthy (BS37)
County
South Gloucestershire
Warranty
One year on every repair
Quote
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026

Honest limits

To be straight with you, some problems need a different fix:

  • Problems we cannot see until an old finish comes off
  • Leaking taps or wastes (a plumber’s job)
  • A bath that is rusted through

Send us pictures and we will tell you honestly.

What we work on

  • Acrylic baths
  • Cast iron baths
  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths

The process

There’s not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. Most visits take most of the day, including clearing up.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. The bath is degreased, repaired and keyed.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Mention if the room is upstairs or in a flat
  • Tell us about parking, stairs or access
  • Clear toiletries, mats and anything else from around the area

How to get a price

To get a price, send a couple of pictures through our quote form or ring us. We’ll tell you honestly if a repair is the right fix.

Get a free quote

Advice

Materials and what they mean for the repair

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Acrylic

Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.

Can I fix it myself?

If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.

For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

About Rangeworthy

Rangeworthy is about 2 miles north-west of Yate, in South Gloucestershire. Our repair technicians come to clients in Rangeworthy, so nothing has to leave your home. Rangeworthy is one of 110 places in South Gloucestershire where we work. Our jobs stretch from Rangeworthy to Birmingham (66 miles away).

Jobs in BS37 are booked in the same way as anywhere else. That includes homes on New Road, Gifford Close and The Grove. We also travel to Bagstone (1 mile north), Engine Common (1 mile south), Iron Acton (2 miles south-west), Stidcot (2 miles north) and Yate Rocks (2 miles south-east). We also work in nearby towns such as Kingswood (9 miles south), Mangotsfield (6 miles south), Fishponds (7 miles south-west), Bradley Stoke (5 miles south-west), Thornbury (4 miles north-west) and Patchway (6 miles south-west).

Near you in Rangeworthy

We visit homes around Brimsham Green School, Church of the Holy Trinity and Rangeworthy Church of England Primary School, among other places. The closest station to Rangeworthy is Yate station, roughly 2.1 miles south of the centre. A little further out are Dodington Carriage Museum (3.7 miles south-east) and Thornbury Castle (4.7 miles north-west).

Map of Rangeworthy © OpenStreetMap contributors

Should you replace it?

Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Resurfacing in place avoids that entirely. Prices start from £350. We charge the same wherever you are, with no extra for Rangeworthy. What changes the price is the job itself: the material, the amount of damage and how many items.

Why choose Surface Doctor in Rangeworthy

  • No need to remove anything
  • Dust sheets down, tidy finish
  • Fixed prices from your pictures
  • Technicians who travel to you, UK-wide

Take a look at our full price list and resurfacing vs replacement cost guide.

Aftercare tips

To keep it looking its best:

  • Stick to gentle, non-abrasive cleaners
  • Respect the curing time we give you
  • A dripping tap should be fixed promptly
  • A quick wipe after use keeps limescale away

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.

Rangeworthy: your questions answered

Will there be fumes?

Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.

It’s been repaired before. Can you still fix it?

Typically, yes. We remove the old repair before doing a new one.

Can you price it without visiting?

Generally, yes. Clear pictures let us give you a fixed quote without visiting.

Is my repair covered?

Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.

Do you need to take the bath out?

No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.

What happens once I’ve sent pictures?

We come back with a fixed quote. There is no obligation to book.

How long does re-enamelling take?

One day for most baths, ready the following day. We give you timings with the quote.

Is there any odour?

A little, depending on the job. Ventilation keeps it to a minimum.

What bath re-enamelling costs

Resurfacing from £350. We don’t charge extra for travel to Rangeworthy. The price comes down to:

  • Whether old repairs or coatings need taking off
  • The material and finish
  • Access to the area
  • The colour and finish to match

We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

How to get a fixed price

When you take your photos, these tips help us give you a firm price:

  • What it’s made of, if you know
  • Natural light rather than flash
  • Something in shot to show the size
  • A wider photo showing the whole bath

Most clients in Rangeworthy get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.