Rotherham · England

Bath re-enamelling & resurfacing in Ravenfield Common, Rotherham

Damaged bath in Ravenfield Common? We put it right where it is, match it on site and guarantee the work for a year.

  • Resurfacing from £350
  • A peeling or bubbling previous coating
  • Enamel that is lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Ravenfield Common

Bath re-enamelling at your home in Ravenfield Common

Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Typical jobs include thin, worn enamel in places and chips and rust in more than one place, on cast iron baths, acrylic baths and Victorian roll-tops.

You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.

Stained basin resurfaced to clean white (before and after)
Where
Ravenfield Common (S65)
County
Rotherham
Warranty
12 months on all our work
Quote
From £350. Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026

Repairing versus replacing in Ravenfield Common

If the bath is sound, re-enamelling is usually much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Prices start from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Why Ravenfield Common clients choose us

  • Colours mixed by hand to suit your surface
  • Work done at your home or business
  • Honest advice, even when it means no job
  • A year’s guarantee on all work

Read our prices page or guide to resurfacing and replacement costs.

What we are called out for in Ravenfield Common

By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.

Look out for any of the following:

  • Wear marks under the taps
  • Chips and rust in more than one place
  • A bath that stays dull however much you clean it
  • An old resurfacing that is failing

Before you book anyone

  • How long it needs to cure
  • What prep work is covered
  • Whether the price is fixed and includes VAT
  • How your room will be protected

How to compare quotes

How the visit works

Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which generally takes the best part of a day. If we find something your photos didn’t show, we will explain it before carrying on.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. Several coats of finish are sprayed on, then it cures.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Mention any parking restrictions or tricky access
  • Tell us about any previous repairs or coatings

How to get a price

We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Get a fixed quote

Read more

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.

Questions from Ravenfield Common

Will it make a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Just make sure the landlord agrees.

Someone resurfaced my bath and it’s peeling. Can you help?

In most cases. The old coating comes off before we resurface it. Mention it when you send photos.

What does bath re-enamelling cost?

Resurfacing from £350. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

How long does re-enamelling last?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

Is repairing better than replacing?

Typically, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.

What affects the price in Ravenfield Common

Prices start from £350. There are no hourly rates or hidden extras. The price depends on:

  • Previous DIY repairs that have to come out
  • How hard the colour is to match
  • How easy the damage is to reach
  • How many areas need work

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Send photos for a quote

Phone photos are fine, there’s no need for anything special. Just ensure we can see:

  • What it’s made of, if you know
  • Any earlier repairs or coatings
  • A close-up of the damage, in focus
  • Where you are, by postcode

The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll say right away if a repair is the right fix.

Honest limits

A repair isn’t right for every job, including:

  • Holes rusted through the metal
  • A poorly supported acrylic bath, until it’s firmed up
  • A cast iron or steel bath that is cracked right through

Send us photos and we’ll tell you honestly before booking.

Surfaces we repair

  • Pressed steel baths
  • Victorian roll-tops
  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths

Different materials, different repairs

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.

Ravenfield Common and nearby

Ravenfield Common is about 3 miles west of Maltby, in Rotherham. Across the S65 area, a technician comes to you. Our repair technicians cover all 71 towns and villages in Rotherham. Our jobs stretch from Ravenfield Common to Leeds (about 28 miles away).

Every address in S65 is covered. That includes homes on Smeaton Close, Longfield Drive and Jasmin Close. We also cover the places around Ravenfield Common: Sunnyside (1 mile south-west), Bramley (1 mile south), Ravenfield (1 mile north), Flanderwell (1 mile south-west) and Hellaby (1 mile south-east). Larger places within reach include Rotherham (4 miles west), Rawmarsh (4 miles north-west), Maltby (3 miles east), Dinnington (5 miles south-east), Clifton (3 miles west) and Swinton (4 miles north-west).

Local landmarks in Ravenfield Common

Typical jobs here are in homes near Ravenfield Primary Academy, St Francis and Wickersley School and Sports College and the streets around them. Ravenfield Common’s nearest station is Swinton (South Yorks) station, roughly 3.7 miles north-west of the centre. Well-known places in the area include York And Lancaster Regimental Museum (3.5 miles west) and Conisbrough Castle (3.5 miles north-east). Not far away are Denaby Ings.

Map of Ravenfield Common © OpenStreetMap contributors

Landlord and trade work in Ravenfield Common

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.