Rotherham · England
Bath Re-enamelling in Wickersley
Our technicians come to Wickersley for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A roll-top that’s seen better days
- Wear marks under the taps
FAQs for Wickersley
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Can you price it without visiting?
Usually, yes. Clear pictures let us give you a fixed price without visiting.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Do you come to Wickersley?
We do. We send a technician to Wickersley for every job, and the price is the same as everywhere else.
What happens next?
We review the photos and send a fixed quote with dates.
Can you redo someone else’s repair?
In most cases. The old repair comes out first.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Bath re-enamelling in Wickersley, done in place
We don’t move the bath, so the taps, tiles and plumbing aren’t touched. It typically takes one visit, and can be used again the next day. Typical jobs include lots of chips and rust spots and a dull, rough surface that won’t come clean, in Victorian roll-tops, basins & shower trays and cast iron baths.
A one-year guarantee comes as standard, so you are covered after the visit.
- Area
- Wickersley (S66)
- Region
- Rotherham
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we check it carefully.
Repair or replace in Wickersley?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing usually wins. Prices start from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.
Why book with us
- Colour mixed on the day to match
- Same prices wherever you are
- Work done at your home or business
- No need to remove anything
Take a look at our prices page or bath cost comparison.
Places near Wickersley
What else we do in Wickersley
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
When a repair isn’t the answer
Before booking, it’s worth knowing the limits:
- A cast iron or steel bath that’s cracked right through
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
Send us pictures and we’ll tell you honestly before booking.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
Our work in Wickersley
Wickersley is about 3 miles west of Maltby, in Rotherham. Clients in Wickersley get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Our repair technicians cover all 71 towns and villages in Rotherham, from the larger towns to small villages. Our jobs stretch from Wickersley to Leeds (29 miles away).
Our visits in S66 are booked in the same way as anywhere else. Whether you live on Lindum Drive, Minden Close and Moss Close or anywhere nearby, a technician can come to you. If you are just outside Wickersley, we cover Listerdale (1 mile west), Flanderwell (1 mile north), Bramley (1 mile north-east), Sunnyside (1 mile north) and Ravenfield Common (1 mile north-east). Within a short drive, we also cover Rotherham (3 miles west), Rawmarsh (4 miles north-west), Maltby (3 miles east), Dinnington (4 miles south-east), Clifton (3 miles west) and Swinton (5 miles north).
What’s near Wickersley
Our customers here include homes close to Wickersley School and Sports College, Church of St Alban and St Alban's CofE (Aided) Primary School and the streets around them. For rail, the closest station is Rotherham Central station, roughly 3.5 miles west of the centre. A little further out are Rotherham General Hospital (2.7 miles west) and York And Lancaster Regimental Museum (2.9 miles west). Not far away are Denaby Ings.
How the visit works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes the best part of a day. We clean up when we’re done and let you know when you can use it again.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Let us know which floor the room is on
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
How to get a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Prices and what affects them
Prices start from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- The colour and finish to match
- How many areas need work
- Where the damage is and how we get to it
- The type of damage
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Quotes from your photos
Most quotes are done from photos alone. To make it quick:
- The postcode, so we can plan the visit
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- The material, if you know it
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Aftercare tips
So the finish stays in good condition:
- Wipe the bath dry after use in hard water areas
- Fix dripping taps quickly
- Avoid suction-cup mats
- Leave the bath for the full curing time before using it
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
About our accreditations · Every repair comes with a one-year guarantee.
