Cheshire East · England
Bath re-enamelling & resurfacing in Ravenshall, Cheshire East
We travel to Ravenshall for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A peeling or bubbling previous coating
- An original cast iron bath that needs restoring
How we handle bath re-enamelling in Ravenshall
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We regularly repair cast iron baths, acrylic baths and basins & shower trays, and the jobs we see most are staining under the taps and around the waste and a coloured bath you want in white.
Every repair comes with our one-year guarantee, wherever you are in Cheshire East.
- Where
- Ravenshall (CW3)
- Region
- Cheshire East
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath re-enamelling in Ravenshall
Can I add another job to the visit?
Of course, and it generally saves money. Send pictures of everything together and we will quote them together.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is there a call-out fee?
We do not add a call-out fee. Your fixed quote includes everything.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo with your CW3 postcode.
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
The process
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Plan for the best part of a day. Before leaving, we tell you how long to leave it and how to look after it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Clear the area around the damage
- Mention any parking restrictions or tricky access
- Plan for the room to be out of bounds to pets and children
Getting a price
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Related advice
Signs you need bath re-enamelling in Ravenshall
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
Signs it’s time to call us include:
- Several chips and rust patches
- A period or roll-top bath worth keeping
- A coloured bath you want in white
- A dull, rough surface that won’t come clean
Questions to ask before you book
- The length of the guarantee and what it covers
- If travel is included in the price
- How the room is protected while they work
- Whether they match the colour on site
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
- A bath split right through the body
Send us pictures and we’ll tell you honestly.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
Prices and what affects them
Prices start from £350. We do not charge extra for travel to Ravenshall. The price comes down to:
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- Previous DIY repairs that have to come out
- How many items we do on one visit
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.
Quotes from your pictures
Good photos mean an accurate price. Here’s what helps:
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- Natural light rather than flash
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Repairing versus replacing in Ravenshall
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the whole surface with the bath left where it is. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Why us?
- We come to you, anywhere in the UK
- No need to remove anything
- CHAS and Constructionline accredited
- One visit for most repairs
See our pricing and resurfacing vs replacement cost guide.
Landlord and trade work in Ravenshall
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Landlords, letting agents and housing providers in Ravenshall use us as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
How to care for the repair
Aftercare is simple:
- Clean with a soft cloth and mild detergent
- Never use suction bath mats
- Store bottles off the bath
- Dry the bath after use to stop limescale
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
Nearby places to Ravenshall
Other services in Ravenshall
Ravenshall and the surrounding area
Ravenshall is about 6 miles west of Newcastle-under-Lyme, in Cheshire East. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. We work in all 254 towns and villages in Cheshire East, from the larger towns to small villages. Our nearest city page is Manchester, about 32 miles away.
All of CW3 is covered. You’ll find streets such as The Meadows, Old Road and Main Road. Close by, we cover Wrinehill (1 mile south), Betley (1 mile north), Bowsey Wood (1 mile south-east), Checkley (1 mile south-west) and Heighley (1 mile east). Within a short drive, we also cover Crewe (6 miles north-west), Congleton (12 miles north-east), Nantwich (7 miles north-west), Middlewich (12 miles north), Sandbach (8 miles north) and Coppenhall (7 miles north-west).
Near you in Ravenshall
Around Ravenshall, we work in homes near Betley CofE VC Primary School, Madeley High School and Church of St Margaret, among other places. Other landmarks nearby include Englesea Brook Chapel and Museum of Primitive Methodism (2.6 miles north) and Checkley cum Wrinehill (0.7 miles south-west). For a walk, there’s Black Firs and Cranberry Bog and Bignall Hill.
About our accreditations · Every repair comes with a one-year guarantee.
