Cheshire East · England
Bath re-enamelling & resurfacing in Betley, Cheshire East
Damaged bath in Betley? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- An old resurfacing that is failing
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Bath re-enamelling in Betley, done in place
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. Our repair technicians work on basins & shower trays, pressed steel baths and Victorian roll-tops, and common reasons people contact us are an old resurfacing that’s failing and a coloured bath you want in white.
You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Betley (CW3)
- County
- Cheshire East
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
When to call us in Betley
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Most people get in touch after spotting one of these:
- Staining under the taps and around the waste
- A bath in a colour that no longer suits
- A roll-top that is seen better days
- Worn patches where water runs and sits
Comparing quotes
- How the room is protected while they work
- If travel is included in the price
- When it can be used again
- Whether the colour is mixed to match
Betley questions
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
I rent my home. Can I book you?
Yes. Check with your landlord; we can send the quote to them too.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
What happens after I send photos?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Cheshire East.
Can I add another job to the visit?
Of course, and it usually saves money. Just add the extra items to your pictures and you will get one combined price.
Do you come to Betley?
Yes. We work across the UK and come to Betley. Send us photos for a fixed quote, or call 0345 017 0787.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send photos.
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- A dripping tap should be fixed promptly
- Clean with a soft cloth and mild detergent
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
When a repair isn’t the answer
We will not take on work that won’t last, so here’s what a repair cannot put right:
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Towns and villages near Betley
Other services in Betley
What happens on the day
We agree an arrival time beforehand, so you know when to expect us. On site, it takes a full day. We leave the room clean and you’ll know when it can be used.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Let us know about parking or access
- Let us know if it has been repaired before
- Let us know which floor the room is on
Getting a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Related advice
Should you replace it?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not your postcode. You will see the full price before you book, with nothing added on the day.
Why us?
- Most jobs done in one visit
- Rooms protected and left tidy
- Colour-matched on site
- A fixed quote before you book
Take a look at our pricing or resurfacing vs replacement cost guide.
Prices and what affects them
Prices start from £350. You will not pay by the hour. The price is based on:
- Whether old repairs or coatings need taking off
- The material and finish
- Access to the area
- How much damage there is
Our prices are the same across the UK, so there’s no premium for Betley. The job itself decides the price: the material, the amount of damage and how many items.
Send pictures for a quote
Phone pictures are fine, there is no need for anything special. Just make sure we can see:
- One picture of the whole bath
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
- Details of any past repairs
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.
Where we work around Betley
Betley is about 5 miles south-west of Alsager, in Cheshire East. Anywhere in CW3, a technician comes to you. We cover all 254 towns and villages across Cheshire East. Our nearest city page is Manchester, about 31 miles away.
Every address in CW3 is within our area. We regularly work on streets such as Chamberlain Court, Ladygates and Rodger Avenue. Being close to the A531, Betley is easy for our repair technicians to reach. Neighbouring places we cover include Ravenshall (1 mile south), Wrinehill (1 mile south), Balterley (1 mile north-east), Knowl Bank (1 mile east) and Balterley Heath (1 mile north). Larger places within reach include Crewe (6 miles north-west), Congleton (11 miles north-east), Nantwich (7 miles west), Middlewich (11 miles north), Sandbach (8 miles north) and Coppenhall (6 miles north-west).
Near you in Betley
In Betley, that means homes near Church of St Margaret and Betley CofE VC Primary School, among other places. The nearest railway station is Crewe station, roughly 4.6 miles north-west of the centre. Nearby you’ll also find Checkley cum Wrinehill (1.4 miles south-west) and Heighley Castle (1.6 miles south-east). For a walk, there is Bignall Hill and Black Firs and Cranberry Bog.
About our accreditations · Every repair comes with a one-year guarantee.
