Cornwall · England
Bath Re-enamelling in Reawla
We travel to Reawla for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Thin, worn enamel in places
- A bath in a colour that no longer suits
Bath re-enamelling in Reawla without replacing anything
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We regularly repair pressed steel baths, basins & shower trays and cast iron baths, and the jobs we see most are a roll-top that’s seen better days and a coloured bath you want in white.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Reawla (TR27)
- County
- Cornwall
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath re-enamelling in Reawla?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
People typically call us after spotting one of these:
- Chips and rust in more than one place
- A roll-top that is seen better days
- Enamel that’s lost its shine and feels rough
- Worn patches where water runs and sits
What to look for in a quote
- What preparation is included
- If travel is included in the price
- A fixed quote, and whether VAT is included
- What protection goes down before work starts
Reawla and nearby
Reawla is about 4 miles south-west of Camborne, in Cornwall. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We cover all 644 towns and villages in Cornwall, from the larger towns to small villages.
We work across the TR27 postcode area and the streets around it. We regularly work on streets such as Henver Close, Henver Gardens and Relistian Park and the roads around them. We also cover the places around Reawla: Wall (1 mile north-east), Rosewarne (1 mile north-east), Gwinear (1 mile north-west), Gwinear Downs (1 mile south) and Calloose (1 mile south-west). Further out, we also cover Truro (15 miles north-east), Falmouth (12 miles east), Camborne (4 miles north-east), Redruth (7 miles north-east), Penzance (9 miles south-west) and Helston (6 miles south-east).
Around Reawla
In Reawla, that means homes near Hayle Academy, Church of Saint Winnear and The Royal Standard Public House. The nearest railway station is Hayle station, roughly 2.9 miles west of the centre. Well-known places in the area include St Michael's Hospital (3 miles west) and Hayle Heritage Centre (2.9 miles west). Not far away are Godolphin Hill.
Prices and what affects them
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- Access to the area
- Previous DIY repairs that have to come out
- The size and number of damaged areas
- Doing more than one item at once
A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with nothing added on the day.
How to get a fixed quote
It only takes a minute to photograph the damage. Try to send:
- Whether it’s been repaired or coated before
- Something in shot to show the size
- A wider photo showing the entire bath
- Your postcode, so we can check dates
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote.
Reawla: your questions answered
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Do you cover Reawla?
Yes. We work across the UK and come to Reawla. Send pictures and we will quote, or call 0345 017 0787.
How much does bath re-enamelling cost in Reawla?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Materials and what they mean for the repair
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Repair or replace in Reawla?
If the bath is sound, re-enamelling is usually much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why Reawla customers choose us
- Accredited with CHAS, Constructionline and SafeContractor
- No extra charge for your area
- Repair technicians who travel to you, UK-wide
- Every repair guaranteed for a year
Read our pricing or guide to resurfacing and replacement costs.
How the visit works
Here’s how a visit usually runs: we arrive on time, protect everything around the work area, carry out the work and tidy away. Allow a full day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the following day.
Before we arrive
- Clear the area around the damage
- Mention any parking restrictions or tricky access
- Tell us if there are stairs or a lift
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Advice
When a repair is not the answer
A few problems are outside what a surface repair can do:
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
- Leaks from fittings rather than the bath
Send us pictures and we’ll tell you honestly before booking.
Materials we repair
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Basins & shower trays
How to look after the repair
Simple care helps the repair last. Our advice:
- Leave the bath for the full curing time before using it
- Keep toiletries on a shelf rather than in the bath
- Wipe the bath dry after use in hard water areas
- Do not let dyes or oils sit on the finish
Wipe the bath dry after use where you can, and rinse off any bath products.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Other services in Reawla
About our accreditations · Every repair comes with a one-year guarantee.
