Oxfordshire · England
Bath Re-enamelling in Remenham
Our repair technicians come to Remenham for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A roll-top that is seen better days
Bath re-enamelling in Remenham, done in place
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We work on acrylic baths, cast iron baths and pressed steel baths, and common reasons people get in touch are staining under the taps and around the waste and a roll-top that’s seen better days.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Remenham (RG9)
- County
- Oxfordshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Remenham. The price reflects:
- How hard the colour is to match
- The material
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
We charge the same wherever you are, so there is no premium for Remenham. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from photos
When you take your pictures, these tips help us give you a firm price:
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- Any earlier repairs or coatings
- Where you are, by postcode
To get a price, send a couple of pictures using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Use washing-up liquid and a soft cloth
- Wipe the bath dry after use in hard water areas
- Keep toiletries on a shelf rather than in the bath
- Wash away dyes and oils after use
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
When to call us in Remenham
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
If you can see any of these, send us a photo:
- A bath in a colour that no longer suits
- Stains that will not shift
- A peeling or bubbling previous coating
- A dull, rough surface that won’t come clean
Before you book anyone
- Whether there are any call-out or travel charges
- What aftercare is recommended
- How soon you can use it again
- What protection goes down before work starts
The process
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, do the job and clear up. Allow the best part of a day. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Ensure the room can be ventilated
- Keep pets and children out of the room while we work
Ask for a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Advice
Also near Remenham
What else we do in Remenham
What we cannot put right
To be straight with you, some problems need a different fix:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- Holes rusted through the metal
Send us pictures and we will tell you honestly before booking.
Materials we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Covering Remenham
Remenham is about 5 miles west of Marlow, in Oxfordshire. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Remenham is one of 443 towns and villages in Oxfordshire we cover. Our nearest city page is London, about 34 miles away.
Here we cover the RG9 postcode area. Neighbouring places we cover include Aston (1 mile east), Remenham Hill (1 mile south-east), Mill End (1 mile north-east), Medmenham (2 miles east) and Cockpole Green (2 miles south-east). Further out, we also cover Thame (14 miles north), Benson (10 miles north-west), Chinnor (10 miles north), Tilehurst (9 miles south-west), Wallingford (11 miles west) and Little Heath (9 miles south-west).
Landmarks near Remenham
Typical jobs here are in homes near Rupert House School, Old White Horse pub and Church of St Nicholas. Also close by are Gillotts School (2.2 miles south-west), Fawley Court and Temple Island (less than half a mile west) and Badgemore Primary School (1.1 miles south-west). Remenham’s nearest station is Henley-On-Thames station, about 1.2 miles south. Other landmarks nearby include Frazer Nash Archives (1.4 miles south) and Marlow Community Hospital (5.4 miles east). For a walk, there is Hurley Chalk Pit.
Your questions about bath re-enamelling in Remenham
Can tenants book a repair?
Of course. Ask your landlord first, and we can send them the quote if that helps.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
How soon can you come?
It depends on the time of year and where you are. We will offer you dates when we send your quote.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Can I fix it myself?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
About our accreditations · Every repair comes with a one-year guarantee.
