Oxfordshire · England
Bath re-enamelling & resurfacing in Aston, Oxfordshire
Problem with your bath in Aston? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Stains that will not shift
- A bath that stays dull however much you clean it
Questions from Aston
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do the materials smell?
It depends on the job, but often a little. Open windows and an extractor fan help.
Is there a smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Do you cover Aston?
Yes. We work across the UK and travel to Aston and the rest of Oxfordshire. Send photos and we will quote, or call 0345 017 0787.
How long will the bath be out of use?
Usually a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we’ll tell you.
How we handle bath re-enamelling in Aston
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Whether it’s an old resurfacing that’s failing and stains that won’t shift, we can help.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.
- Area
- Aston (RG9)
- Region
- Oxfordshire
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Aston and nearby
Aston is about 2 miles north-east of Henley-on-Thames, in Oxfordshire. Anywhere in RG9, we come to you. Aston is one of 443 places in Oxfordshire where we work. We work right across the region, from Aston to London (about 34 miles away).
Our visits in RG9 are booked in the same way as anywhere else. You’ll find streets such as Remenham Lane and Aston Ferry Lane, all of which we cover. We also cover the places around Aston: Mill End (1 mile north), Remenham Hill (1 mile south), Remenham (1 mile west), Medmenham (1 mile east) and Bockmer End (2 miles east). Further out, we also cover Thame (14 miles north), Benson (11 miles north-west), Chinnor (10 miles north), Tilehurst (9 miles south-west), Wallingford (12 miles west) and Little Heath (10 miles south-west).
What’s near Aston
Typical jobs here are in homes near Fawley Court and Temple Island, Church of St Nicholas and Flower Pot Hotel. The nearest railway station is Henley-On-Thames station, about 1.7 miles south-west of the centre. Further afield, we also cover the area around Marlow Community Hospital (4.6 miles east) and Frazer Nash Archives (1.9 miles south-west). Not far away are Weycock Hill and Hurley Chalk Pit.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Looking after it afterwards
Aftercare is simple:
- Get any chip repaired quickly
- Fix dripping taps quickly
- Don’t use the bath until it has fully cured
- Store bottles off the bath
Rinse the bath and wipe it over after use, particularly where water is hard, so limescale can’t build up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Repairing versus replacing in Aston
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
What you get with us
- Free fixed quotes from pictures
- One price list for the entire UK
- Straight answers about what a repair can do
- Generally one visit, start to finish
Take a look at our prices page or guide to resurfacing and replacement costs.
Towns and villages near Aston
Also in Aston
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- Whether we combine several jobs
- The size and number of damaged areas
- How easy the damage is to reach
- Any earlier repairs that need removing first
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A close-up of the damage, in focus
- A coin or ruler next to the damage for scale
- A photo taken from further back
- Details of any past repairs
Most customers in Aston get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
What a repair cannot fix
Some jobs aren’t right for a repair, including:
- A metal bath with a through crack
- An acrylic bath that flexes badly underfoot
- Problems we can’t see until an old finish comes off
Send us photos and we will tell you honestly before booking.
What we work on
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
What happens on the day
We work cleanly and quietly. We protect the area first, then the work takes a full day. Before we leave, we explain the curing time and the aftercare.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the day after.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Ensure the room can be ventilated
- Point us to the nearest place to park
Get a quote
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll handle the rest.
About our accreditations · Every repair comes with a one-year guarantee.
