Oxfordshire · England

Bath Re-enamelling in Remenham Hill

Bath re-enamelling in and around Remenham Hill: a fixed quote from pictures, a tidy visit and a one-year guarantee.

  • Resurfacing from £350
  • An old resurfacing that is failing
  • A roll-top that’s seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Remenham Hill?

Bath re-enamelling at your home in Remenham Hill

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s a dull, rough surface that won’t come clean and a period or roll-top bath worth keeping, we can help, on cast iron baths, basins & shower trays and acrylic baths alike.

All our work comes with a one-year guarantee.

Before and after: an old basin refinished to bright white
Area
Remenham Hill (RG9)
Region
Oxfordshire
Cover
12 months on all our work
Quotes
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026

What we are called out for in Remenham Hill

By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.

Most people contact us after spotting something like this:

  • A bath that stays dull however much you clean it
  • A period or roll-top bath worth keeping
  • A coating lifting around the plughole
  • Worn patches where water runs and sits

What your quote should include

  • What happens if the damage is worse than the photos show
  • The length of the guarantee and what it covers
  • Whether a trained technician does the job
  • Aftercare advice

Our hiring checklist

Should I try a DIY kit first?

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

How the visit works

Your technician turns up when we said we would and checks the damage against your pictures first. The floor and nearby surfaces are covered before any work starts. The work itself takes most of the day, and we leave the room as we found it.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Getting ready for the visit

  • Keep pets and children out of the room while we work
  • Ensure the room can be ventilated
  • Let us know which floor the room is on

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Get a fixed quote

Advice

What affects the price in Remenham Hill

Prices start from £350. There’s no charge for travel to Remenham Hill. The price depends on:

  • How many items we do on one visit
  • Unusual colours or finishes
  • Access to the area
  • The type of damage

We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Quotes from your pictures

You can take the photos on your phone, there’s no need for anything special. Just make sure we can see:

  • One picture of the whole bath
  • The material, if you know it
  • Natural light rather than flash
  • A close-up of the damage, in focus

Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.

About Remenham Hill

Remenham Hill is about 5 miles south-west of Marlow, in Oxfordshire. Our repair technicians come to customers in Remenham Hill and the surrounding area, so nothing has to leave your home. We work in all 443 towns and villages in Oxfordshire. Our nearest city page is London, about 34 miles away.

Jobs in RG9 are booked in the same way as anywhere else. You will find streets such as White Hill and Aston Lane, all of which we cover. Nearby, we also work in Aston (1 mile north), Remenham (1 mile north-west), Mill End (1 mile north), Cockpole Green (1 mile south-east) and Medmenham (2 miles north-east). Within a short drive, we also cover Thame (15 miles north), Benson (11 miles north-west), Chinnor (11 miles north), Tilehurst (9 miles south-west), Wallingford (12 miles west) and Little Heath (9 miles south-west).

Landmarks near Remenham Hill

In Remenham Hill, that means homes near Gillotts School, Church of St Nicholas and Rupert House School. You’ll also find Mill Meadows (0.9 miles south-west) and Flower Pot Hotel (0.9 miles north). Remenham Hill’s nearest station is Henley-On-Thames station, about 1.1 miles west of the centre. Further afield, we also cover the area around Frazer Nash Archives (1.1 miles south-west) and Marlow Community Hospital (5.1 miles north-east). Open spaces near Remenham Hill include Weycock Hill and Hurley Chalk Pit.

Map of Remenham Hill © OpenStreetMap contributors

Should you replace it?

If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. We charge the same wherever you are, so there is no premium for Remenham Hill. What changes the price is the job itself: the material, the amount of damage and how many items.

Why choose Surface Doctor in Remenham Hill

  • Colour-matched on site
  • One-year guarantee on every repair
  • No extra charge for your area
  • Free fixed quotes from pictures

Read our prices page or resurfacing vs replacement cost guide.

When we would advise against a repair

A few problems are outside what a surface repair can do:

  • An acrylic bath that flexes badly underfoot
  • A cast iron or steel bath that is cracked right through
  • Steel that has corroded right through

Send us photos and we will tell you honestly.

Materials we work on in Remenham Hill

  • Pressed steel baths
  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays
  • Victorian roll-tops

Landlords, agents and businesses in Remenham Hill

We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.

We work for landlords, letting agents and housing providers in Remenham Hill as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

Remenham Hill questions

Someone resurfaced my bath and it’s peeling. Can you help?

Normally, yes. The old coating comes off before we resurface it. Mention it when you send pictures.

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Can you price it without visiting?

Nearly always. We only ask to see it in person if the photos cannot show what we need.

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

Is there a call-out fee?

No. Our quotes include travel, with the same prices everywhere we work.

How much does bath re-enamelling cost in Remenham Hill?

Resurfacing from £350. We give a fixed quote from your photos. Send a close-up and a picture of the entire item and your postcode.

Can you change the colour of my bath?

Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.

What do you need from me?

Send photos through the quote form or call 0345 017 0787, and we will take it from there.

Aftercare tips

It’s all simple stuff:

  • Rinse off hair dye, oils and bath bombs straight away
  • Do not leave bottles, razors or sponges standing on the surface
  • A quick wipe after use keeps limescale away
  • Respect the curing time we give you

Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.