Norfolk · England
Bath Re-enamelling for Repps homes
Problem with your bath in Repps? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Chips and rust in more than one place
- Thin, worn enamel in places
Bath re-enamelling in Repps without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. It normally takes one visit, with the bath ready to use the following day. We’re often asked to fix worn patches where water runs and sits and a bath in a colour that no longer suits, in pressed steel baths, cast iron baths and Victorian roll-tops.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will come back.
- Where
- Repps (NR29)
- County
- Norfolk
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Repair or replace in Repps?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
What you get with us
- Colour mixed on the day to match
- CHAS and Constructionline accredited
- One price list for the entire UK
- Usually one visit, start to finish
See our full price list or guide to resurfacing and replacement costs.
When to call us in Repps
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is normally as strong as ever.
You may need us if you’ve spotted any of these:
- A bath that stays dull however much you clean it
- Wear marks under the taps
- Chips and rust in more than one place
- A peeling or bubbling previous coating
What your quote should include
- What prep work is covered
- How soon you can use it again
- Whether a trained technician does the job
- What protection goes down before work starts
For landlords and businesses
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
If you manage property in Repps, we can repair and quote for several addresses together. Send photos for each one and we will price them together.
Questions from Repps
Do you cover the whole of Norfolk?
We work UK-wide, so Repps is covered. Our prices are the same everywhere.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.
What happens next?
We review the pictures and send a fixed quote with dates.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
What do you need from me?
A close-up, a wider photo and your postcode. Then we will agree a date.
Prices and what affects them
Prices start from £350. A fixed quote means you know the cost before you book. We take into account:
- What the surface is made of
- How many areas need work
- The type of damage
- Whether old repairs or coatings need taking off
Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and doing several items at once reduces it.
Getting a price from photos
A couple of clear pictures is all it takes. Try to include:
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- Any details about the material
- A coin beside the damage so we can judge size
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Honest limits
We won’t take on work that won’t last, so these are the limits:
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
- A bath split right through the body
Not sure? Send photos and we’ll give you a straight answer.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Nearby places to Repps
Also in Repps
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes most of the day. We clean up when we are done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Ensure the area is dry
- Keep a parking space free if you can
Get a quote
The quickest way to a price is to send a couple of pictures using our quote form or call us. We will say immediately whether it can be repaired.
Related advice
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Covering Repps
Repps is about 9 miles north-west of Great Yarmouth, in Norfolk. Across the NR29 area, a technician comes to you. Our repair technicians cover 797 places across Norfolk, from the larger towns to small villages.
Jobs in NR29 are booked in the same way as anywhere else. Whether you live on Church Road and Staithe Road or anywhere nearby, we can come to you. We also cover the places around Repps: Thurne (1 mile south-west), Clippesby (2 miles south), Billockby (2 miles south), Ludham Bridge (3 miles west) and Upton (3 miles south-west). Within a short drive, we also cover Norwich (13 miles west), Great Yarmouth (9 miles south-east), Gorleston-on-Sea (10 miles south-east), Sprowston (11 miles west), Thorpe St Andrew (11 miles south-west) and North Walsham (12 miles north-west).
Near you in Repps
Our clients here include homes close to Church of St Peter and St Paul and the streets around them. For rail, the closest station is Acle station, roughly 4.6 miles south of the centre. Well-known places in the area include Wind Energy Museum (under half a mile west). Green spaces nearby include Catfield Fen Reserve and Hickling Broad.
About our accreditations · Every repair comes with a one-year guarantee.
