Norfolk · England
Bath Re-enamelling in Thurne
Local bath re-enamelling for Thurne: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Enamel that is lost its shine and feels rough
How we handle bath re-enamelling in Thurne
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the next day. We regularly repair acrylic baths, pressed steel baths and basins & shower trays, and common reasons people get in touch are an outdated colour you’d like to change and several chips and rust patches.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Thurne (NR29)
- Region
- Norfolk
- Guarantee
- One year on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Thurne
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Landlords, letting agents and housing providers in Thurne use us as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Towns and villages near Thurne
What else we do in Thurne
Thurne questions
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed quote from your photos. Send a close-up and a photo of the whole item with your NR29 postcode.
Is there a guarantee?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
It’s been repaired before. Can you still fix it?
Typically, yes. The old repair comes out first, so let us know about it.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Can I add another job to the visit?
Of course, and it typically saves money. Just add the extra items to your photos and we’ll quote them together.
Do you cover the entire of Norfolk?
Across the UK. Our prices are the same everywhere.
Aftercare tips
Once the work has cured, treat it gently:
- Get any chip repaired quickly
- Repair dripping taps early
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we take into account:
- How many items we do on one visit
- How easy the damage is to reach
- What the surface is made of
- How much damage there is
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Send pictures for a quote
When you take your photos, these tips help us give you a firm price:
- The material, if you know it
- A coin or ruler next to the damage for scale
- A wider photo showing the whole bath
- Any earlier repairs or coatings
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them to us. You will get a fixed quote, not an estimate.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- Steel that has corroded right through
- A metal bath with a through crack
If in doubt, send photos and we will say what we think before booking.
What we work on
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
Thurne and nearby
Thurne is about 9 miles north-west of Great Yarmouth, in Norfolk. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Thurne is one of 797 places in Norfolk we cover.
All of NR29 is covered. Local streets include The Street and Church Road. Close by, we cover Repps (1 mile north-east), Clippesby (2 miles south-east), Ludham Bridge (2 miles west), Upton (2 miles south) and Billockby (2 miles south-east). We also work in nearby towns such as Norwich (12 miles west), Great Yarmouth (9 miles south-east), Gorleston-on-Sea (11 miles south-east), Sprowston (10 miles west), Thorpe St Andrew (10 miles west) and North Walsham (12 miles north-west).
What’s near Thurne
In Thurne, that means homes near Church of St Edmund. Thurne’s nearest station is Acle station, roughly 3.7 miles south of the centre. Further afield, we also cover the area around Wind Energy Museum (1 mile north-east). Open spaces near Thurne include South Walsham Broad and Ranworth Broad.
What happens on the day
The work is clean and fairly quiet. Protection goes down first, then the work takes the best part of a day. Before we leave, we explain how soon it can be used and how to look after it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Make sure the area is dry
- Open a window if you can
- Mention any parking restrictions or tricky access
How to get a price
If you’re in Thurne and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Advice
Do you need bath re-enamelling in Thurne?
Many baths we resurface have simply been well used, and only the surface is worn. Underneath, a cast iron or steel bath is typically as strong as ever.
Look out for any of the following:
- A coating lifting around the plughole
- Staining under the taps and around the waste
- A period or roll-top bath worth keeping
- A coloured bath you want in white
What your quote should include
- Aftercare advice
- Whether the price covers travel
- What protection goes down before work starts
- What happens if they find more damage
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing usually costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
- Fixed prices from your pictures
- One price list for the entire UK
Read our prices page and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
