Shropshire · England
Bath re-enamelling & resurfacing in Rhoswiel, Shropshire
Full bath re-enamelling and resurfacing at your home in Rhoswiel, with a one-year guarantee on every repair.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A peeling or bubbling previous coating
Bath re-enamelling in Rhoswiel, done in place
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s wear marks under the taps and an original cast iron bath that needs restoring, we can usually put it right, whatever the material.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- Rhoswiel (SY10)
- Area hub
- Shropshire
- Cover
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes a full day. We clean up when we’re done and tell you when it’s ready to use.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Keep a parking space free if you can
- Tell us if there are stairs or a lift
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Read more
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Towns and villages near Rhoswiel
Other services in Rhoswiel
About Rhoswiel
Rhoswiel is about 4 miles north of Oswestry, in Shropshire. Across the SY10 area, a technician comes to you. We work in 433 places in Shropshire, from the larger towns to small villages. Our jobs stretch from Rhoswiel to Liverpool (34 miles away).
Here we cover the SY10 postcode area. We regularly work on streets such as Station Road, Stones Wharf and Berllan Close. Neighbouring places we cover include Chirk Bank (1 mile north), Gledrid (1 mile north), Weston Rhyn (1 mile west), Chirk (1 mile north) and Rhyn (1 mile north-east). Further out, we also cover Oswestry (4 miles south), Wem (14 miles east), Ellesmere (6 miles east), Baschurch (12 miles south-east), Bomere Heath (15 miles south-east) and Whittington (4 miles south-east).
Local landmarks in Rhoswiel
Around Rhoswiel, we work in homes near The Lord Moreton pub, St Martin's School and Weston Rhyn Primary School and the streets around them. The closest station to Rhoswiel is Chirk station, roughly 1.3 miles north-west. A little further out are St Martins (0.6 miles north-west) and Chirk Community Hospital (1.8 miles north). Not far away are Chirk Green Hill and The Lake.
Honest limits
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- A metal bath with a through crack
- Problems we can’t see until an old finish comes off
- Acrylic that moves when you stand in it
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
How to care for the repair
How the surface is treated afterwards matters:
- Get any chip repaired quickly
- Keep suction mats out of the bath
- A dripping tap should be fixed promptly
- Dry the bath after use to stop limescale
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- The material and finish
- Any earlier repairs that need removing first
- The colour and finish to match
- The type of damage
Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Getting a price from photos
We price nearly every job from photos. This is what to send:
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
- Something in shot to show the size
- Any earlier repairs or coatings
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you’re under no obligation.
Questions from Rhoswiel
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Can you re-enamel a roll-top bath?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Repairing versus replacing in Rhoswiel
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Why Rhoswiel clients choose us
- One price list for the entire UK
- Colour-matched on site
- Work done at your home or business
- We leave the room as we found it
See our pricing or guide to resurfacing and replacement costs.
Do you need bath re-enamelling in Rhoswiel?
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
These are the problems we are asked about most:
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
- A dull, rough surface that will not come clean
- A peeling or bubbling previous coating
Questions to ask before you book
- Whether there are any call-out or travel charges
- What the guarantee covers, and for how long
- Aftercare advice
- How your room will be protected
About our accreditations · Every repair comes with a one-year guarantee.
