Neath Port Talbot · Wales
Bath Re-enamelling for Rhyding homes
Full bath re-enamelling and resurfacing at your home in Rhyding, with a one-year guarantee on every repair.
- Resurfacing from £350
- Worn patches where water runs and sits
- An original cast iron bath that needs restoring
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Do not let dyes or oils sit on the finish
- Dry the bath after use to stop limescale
- Leave the bath for the full curing time before using it
- Do not leave bottles, razors or sponges standing on the surface
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
About our bath re-enamelling in Rhyding
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with a period or roll-top bath worth keeping and a coating lifting around the plughole, we can help, whatever the material.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Rhyding (SA10, SA11)
- County
- Neath Port Talbot
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Towns and villages near Rhyding
What else we do in Rhyding
The process
There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to the best part of a day, including clearing up.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Let the surface dry out before the visit
- Plan for the room to be out of bounds to pets and children
Ask for a price
For a price in Rhyding, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Rhyding: your questions answered
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Just add the extra items to your pictures and we’ll quote them together.
What happens if you find more damage?
The price is fixed for what the photos show. If there is more, we’ll tell you before starting.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Landlord and trade work in Rhyding
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip.
What affects the price in Rhyding
Resurfacing from £350. There’s no area surcharge for Rhyding. The price reflects:
- Whether we combine several jobs
- The material and finish
- The colour and finish to match
- Any earlier repairs that need removing first
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what to send:
- Your postcode, so we can check dates
- Any details about the material
- One picture of the entire bath
- Any earlier repairs or coatings
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Rhyding and the surrounding area
Rhyding is about 1 mile north of Neath, in Neath Port Talbot. Across the SA10 area, we carry out the work at your property. Our technicians cover all 100 towns and villages across Neath Port Talbot, from the larger towns to small villages.
All of SA10 and SA11 is within our area, from the main roads to the quietest streets. From Mill Road, Main Road and Birch Lane or anywhere nearby, a technician can come to you. You will find Rhyding on the A474, which makes it straightforward to reach. Neighbouring places we cover include Cadoxton-juxta-Neath (1 mile south), Cwrt Herbert (1 mile south-west), Waun-ceirch (1 mile south-west), Bryncoch (1 mile north-west) and Neath (1 mile south). We also work in nearby towns such as Port Talbot (5 miles south), Sandfields (6 miles south), Baglan Moors (5 miles south), Sandfields West (5 miles south), Sandfields East (6 miles south) and Pontardawe (4 miles north-west).
Local landmarks in Rhyding
Our clients here include homes close to Church Of Saint Cattwg, Crown & Sceptre Inn and Dwr-y-Felin Comprehensive School. For rail, the closest station is Neath station, roughly 0.8 miles south. A little further out are Pelenna (3 miles south-east) and Tonna Hospital (1.8 miles east). Open spaces near Rhyding include Gnoll Estate Country Park lake 1 and Cwm Clydach RSPB Reserve.
What we can’t put right
We’d rather lose a job than do one that won’t last, so these are the limits:
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
If in doubt, send pictures and we will say what we think.
What we work on
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
Repairing versus replacing in Rhyding
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Prices start from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Why us?
- Dust sheets down, tidy finish
- Colour-matched on site
- Work done at your home or business
- No extra charge for your area
Read our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
