Sheffield · England
Bath Re-enamelling in Ringinglow
Problem with your bath in Ringinglow? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A roll-top that is seen better days
- A bath that stays dull however much you clean it
Bath re-enamelling in Ringinglow, done in place
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We regularly repair basins & shower trays, acrylic baths and cast iron baths, and the jobs we see most are an old resurfacing that’s failing and a period or roll-top bath worth keeping.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we will come back.
- Where
- Ringinglow (S11)
- County
- Sheffield
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
- Plumbing leaks, which need a plumber
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- A quick wipe after use keeps limescale away
- Do not let dyes or oils sit on the finish
- A dripping tap should be fixed promptly
- Do not use the bath until it has fully cured
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Common questions in Ringinglow
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Will there be fumes?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
Do you cover Ringinglow?
We do. Repair technicians travel to Ringinglow from across the region, with no extra charge for travel.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we will reply with the earliest dates.
Ringinglow and nearby
Ringinglow is about 4 miles west of Sheffield, in Sheffield. Wherever you are in the S11 postcode area, we come to you. We work in 118 places in Sheffield, from the larger towns to small villages. We work right across the region, from Ringinglow to Manchester (28 miles away).
We cover every part of the S11 postcode area and the streets around it. We regularly work on streets such as Ringinglow Road and Fulwood Lane and the roads around them. Neighbouring places we cover include Bassett (1 mile north-west), Long Line (1 mile south-east), Fulwood (1 mile north-east), Whirlow (2 miles east) and Hallam Head (2 miles north). Further out, we also cover Sheffield (4 miles east), Netherthorpe (4 miles north-east), Upperthorpe (4 miles north-east), West End (4 miles north-east), Walkley (4 miles north-east) and Broomhall (4 miles north-east).
Around Ringinglow
Our customers here include homes close to Whirlow Brook Park, Fulwood Old Chapel and Silverdale School and the streets around them. The nearest railway station is Dore & Totley station, roughly 2.6 miles south-east of the centre. Further afield, we also cover the area around Ecclesall Bierlow (2.4 miles east) and Shepherd Wheel (1.9 miles north-east). Green spaces nearby include Burbage Rocks and Fox Hagg.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
For landlords and businesses
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What affects the price in Ringinglow
Resurfacing from £350. There’s no area surcharge for Ringinglow. What changes the price is:
- What the surface is made of
- Any earlier repairs that need removing first
- Unusual colours or finishes
- How many areas need work
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so you know the cost before you book.
Quotes from your photos
Almost every job we do is priced from pictures. This is what to send:
- A coin or ruler next to the damage for scale
- A picture taken from further back
- Natural light rather than flash
- Where you are, by postcode
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
What else we do in Ringinglow
When to call us in Ringinglow
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
The most common problems we are called about are:
- Lots of chips and rust spots
- A coating lifting around the plughole
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
What to look for in a quote
- What happens if they find more damage
- How your room will be protected
- Whether the price covers travel
- Whether the price is fixed and includes VAT
The process
We turn up at the time we agreed with you and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. The work itself takes most of the day, and we leave the room as we found it.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Ensure the area is dry
- Ensure the room can be ventilated
- Have somewhere for us to park nearby if possible
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
