Sheffield · England
Bath re-enamelling & resurfacing in Fulwood, Sheffield
Problem with your bath in Fulwood? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A peeling or bubbling previous coating
Signs you need bath re-enamelling in Fulwood
Enamel wears gradually. Years of cleaning, hard water and hot baths wear the gloss away, starting where water runs and sits.
Most people get in touch after spotting something like this:
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
- A coating lifting around the plughole
- Brown or grey marks that do not clean off
Comparing quotes
- When it can be used again
- What happens if the damage is worse than the photos show
- Whether the colour is mixed to match
- Is the price fixed, and does it include VAT?
How we handle bath re-enamelling in Fulwood
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. We work on Victorian roll-tops, pressed steel baths and basins & shower trays, and people most frequently call us about an original cast iron bath that needs restoring and an outdated colour you’d like to change.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Location
- Fulwood (S10, S11)
- County
- Sheffield
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Fulwood
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Aftercare tips
After the repair has cured, a few habits help it last:
- Stick to gentle, non-abrasive cleaners
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
- Fix dripping taps quickly
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
When we would advise against a repair
We would rather lose a job than do one that won’t last, so these are the limits:
- A poorly supported acrylic bath, until it’s firmed up
- A bath that is rusted through
- Leaks from fittings rather than the bath
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
What happens on the day
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job typically takes the best part of a day. We clean up when we are done and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Before we arrive
- Point us to the nearest place to park
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
Ask for a price
To get a price, send a couple of pictures using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Read more
Towns and villages near Fulwood
Also in Fulwood
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Your questions about bath re-enamelling in Fulwood
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
What does bath re-enamelling cost?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Can you quote from pictures?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Is there a call-out fee?
There is no separate call-out charge. Your fixed price includes everything.
About Fulwood
Fulwood is about 3 miles south-west of West End, in Sheffield. Anywhere in S10, a technician comes to you. We cover all 118 towns and villages in Sheffield. You can also see our page for Manchester, about 29 miles away.
Our visits in S10 and S11 are booked in the same way as anywhere else. Local streets include Tom Lane, Quiet Lane and Sefton Road, all of which we cover. We also cover the places around Fulwood: Hallam Head (1 mile north), Sandygate (1 mile north-east), Ranmoor (1 mile north-east), Crosspool (1 mile north-east) and Ringinglow (1 mile south-west). We also work in nearby towns such as Sheffield (3 miles east), Netherthorpe (3 miles north-east), Upperthorpe (3 miles north-east), West End (3 miles north-east), Walkley (3 miles north-east) and Chapeltown (7 miles north-east).
What’s near Fulwood
Around Fulwood, we work in homes near Nether Green Infant School, Christ Church and High Storrs School. Fulwood’s nearest station is Dore & Totley station, roughly 2.8 miles south-east. A little further out are Orchard Square (3.2 miles east) and Sheffield Castle (3.6 miles east). Green spaces nearby include Burbage Rocks and Fox Hagg.
- Local facilities include Ecclesall Bierlow (1.5 miles east)
Prices and what affects them
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- Unusual colours or finishes
- Previous DIY repairs that have to come out
- Doing more than one item at once
- How many areas need work
Our prices are the same across the UK, so there is no premium for Fulwood. The job itself decides the price: the material, the amount of damage and how many items.
Send pictures for a quote
Phone pictures are fine. Just make sure we can see:
- What it’s made of, if you know
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
Most clients in Fulwood get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
