Newport · Wales
Bath & shower resealing (mastic) in Ringland, Newport
Bath, shower and sink resealing with new mould-resistant silicone in Ringland, carried out at your home and guaranteed for a year.
- Silicone smeared on tiles
- Unsealed corners
- Leaks at the edges
What bath resealing costs
A fixed quote means you know the cost before you book. We take into account:
- Where the damage is and how we get to it
- Doing more than one item at once
- The colour and finish to match
- How many areas need work
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed quote
Two or three clear pictures are usually enough. Try to include:
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- A photo taken from further back
- What it’s made of, if you know
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
About our bath resealing in Ringland
Baths are resealed with water in them, so the joint opens fully, which stops the new seal tearing the first time the bath is used. We’re frequently asked to fix damp near the bath and gaps in the seal, across basins & vanity units, kitchen worktops & sinks and wet rooms.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Area
- Ringland (NP19, NP18)
- Region
- Newport
- Guarantee
- 12 months on all our work
- Quote
- Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Shower trays
Trays are sealed with weight on them, for the same reason.
Sinks and worktops
Basins, vanity units and kitchen worktops are resealed too, once the joint is completely dry.
Do you need bath resealing in Ringland?
In time, even good sealant discolours, especially in a busy family bathroom. Steam, soap and movement all wear it down.
Get in touch if you’ve noticed any of these:
- An untidy old seal
- Discoloured, yellow sealant
- Mould you can’t clean out
- Gaps in the seal
What your quote should include
- Whether the colour is mixed to match
- Whether a trained technician does the job
- When it can be used again
- How your room will be protected
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About Ringland
Ringland is about 2 miles east of Victoria, in Newport. From the centre of Ringland to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Ringland is one of 69 places in Newport we cover. We work right across the region, from Ringland to Birmingham (about 75 miles away).
Our technicians cover all of the NP19 and NP18 postcode area. From Dale Road, Hood Road and Abbey Road or anywhere nearby, a technician can come to you. We also cover the places around Ringland: Coldra (1 mile north), Treberth (1 mile west), Bishpool (1 mile west), Christchurch (1 mile north-west) and Lawrence Hill (1 mile west). Within a short drive, we also cover Newport (3 miles west), Stow Hill (3 miles west), Gold Tops (3 miles west), Pillgwenlly (3 miles south-west), Clytha Park (3 miles west) and Shaftesbury (3 miles west).
Local landmarks in Ringland
Typical jobs here are in homes near Llanwern High School, Catch22 Include Wales and Church of the Holy Trinity. Other local landmarks include St Gabriel's R.C. Primary School (within half a mile south-west) and Toby Carvery Coldra pub (within half a mile north). For rail, the closest station is Newport (South Wales) station, about 2.8 miles west. Other landmarks nearby include St Cadoc's Hospital (1.7 miles north-west) and Caerleon Roman Fortress and Baths (1.3 miles north-west). Green spaces nearby include Magor Marsh and The Circles.
FAQs for Ringland
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
Can I add another job to the visit?
Of course, and it generally saves money. Just add the extra items to your photos and you’ll get one combined price.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Why does mould come back so fast?
Typically poor ventilation and moisture sitting on the joint. We use mould-resistant silicone, and ventilation helps it last.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Do you seal over the old sealant?
Never over old. The old sealant is cut out and the joint cleaned and dried.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Why it’s worth resealing in Ringland
Putting new silicone over old doesn’t last. It peels within weeks, and mould stays trapped behind it. We remove the old sealant completely. We charge the same wherever you are, with no extra for Ringland. The job itself decides the price: how much damage, what it’s made of and how many items.
Why us?
- Work done at your home or business
- One-year guarantee on every repair
- Same prices wherever you are
- Honest advice, even when it means no job
Read our prices page.
How it works
Here’s how a visit normally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow around two hours from start to finish. Before we go, we will explain when it can be used and how to look after it.
- All the old sealant is cut out and removed.
- Next we clean the joint and deal with mould.
- We ensure the joint is completely dry.
- Baths are filled with water first, so the joint is at its widest.
- New mould-resistant silicone goes on and is tooled to a neat finish, taps included.
How to prepare
- Ensure the room can be ventilated
- Let the surface dry out before the visit
- Let us know which floor the room is on
How to get a price
To get a price, send a couple of photos using our quote form or call us. We will say immediately whether it can be repaired.
Related advice
Also near Ringland
What else we do in Ringland
Looking after it afterwards
After the repair has cured, a few habits help it last:
- Open a window after bathing
- Reseal at the first sign of lifting
- Use the extractor fan
- Keep bottles off the joints
Good ventilation is the best protection, and dry the joints after bathing.
Black mould in sealant isn’t just unsightly. Resealing early keeps water out of the walls and floor.
Landlord and trade work in Ringland
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Housing associations and facilities teams use us for planned and reactive repairs in Newport and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
