Essex · England

Bath re-enamelling & resurfacing in Rochford, Essex

Our technicians come to Rochford for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.

  • Resurfacing from £350
  • A bath in a colour that no longer suits
  • A period or roll-top bath worth keeping
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Rochford

Bath re-enamelling at your home in Rochford

Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. Common call-outs are for a dull, rough surface that won’t come clean and an outdated colour you’d like to change, across basins & shower trays, Victorian roll-tops and acrylic baths.

Big or small, you get the same one-year guarantee.

Where
Rochford (SS4, SS5, SS6, SS11)
County
Essex
Guarantee
A year, on every repair
Quotes
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Last updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

What affects the price in Rochford

Resurfacing from £350. We charge the same across the UK, including Rochford. The price reflects:

  • Where the damage is and how we get to it
  • Doing more than one item at once
  • Unusual colours or finishes
  • Whether old repairs or coatings need taking off

Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.

Send photos for a quote

Good photos mean an accurate price. Here’s what we find most useful:

  • A coin beside the damage so we can judge size
  • What it’s made of, if you know
  • Good light, ideally daylight, without flash glare
  • Whether it’s been repaired or coated before

Most clients in Rochford get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

When we would advise against a repair

A repair isn’t right for every job, for example:

  • Damage hidden under a previous coating, until it’s stripped back
  • Steel that has corroded right through
  • A cast iron or steel bath that is cracked right through

Send us pictures and we’ll tell you honestly.

What we work on

  • Acrylic baths
  • Victorian roll-tops
  • Cast iron baths
  • Pressed steel baths
  • Basins & shower trays

About Rochford

Rochford is about 3 miles north of Southend-on-Sea, in Essex. We visit clients in Rochford and nearby villages, so there is no workshop to go to. Rochford is one of 644 towns and villages in Essex we cover. Our jobs stretch from Rochford to London (35 miles away).

We work across the SS4, SS5, SS6 and SS11 postcode area. Whether you live on Main Street, London Road and Barbara Close or a nearby road, we can come to you. With the A1245 and B1013 close by, Rochford is simple for us to get to. Neighbouring places we cover include Stroud Green (1 mile south-west), Hawkwell (1 mile north-west), Eastwood (2 miles south-west), Southend-on-Sea (3 miles south) and Chalkwell (3 miles south). Larger places within reach include Chelmsford (14 miles north-west), Basildon (10 miles west), Maldon (10 miles north), Canvey Island (7 miles south-west), Billericay (12 miles west) and Rayleigh (4 miles west).

Landmarks near Rochford

Typical jobs here are in homes near Magnolia Fields, Church of St Andrew and The Marlborough Head pub and the streets around them. Nearby too are King Edmund School (0.7 miles north) and St Teresa's Catholic Primary School (under half a mile east). Rochford’s nearest station is Rochford station, about 0.5 miles south-east. Nearby you will also find Rayleigh Windmill Museum (0.6 miles south-east) and Southend University Hospital (2.3 miles south). For a walk, there’s Pound Wood.

Map of Rochford © OpenStreetMap contributors

The process

We turn up at the time we agreed with you and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. The work itself takes a full day, and the room is left clean and tidy.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. The bath is degreased, repaired and keyed.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

Getting ready for the visit

  • Plan for the room to be out of bounds to pets and children
  • Make sure the area is dry
  • Have somewhere for us to park nearby if possible

Ask for a price

The quickest way to a price is to send a couple of photos using our quote form or ring us. We will tell you honestly whether it can be repaired.

Get a free quote

Related advice

Your questions about bath re-enamelling in Rochford

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can you repair something that is been repaired before?

Generally, yes. Let us know what was used before.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Is it OK to have pets in the house?

We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time that suits you.

How do I get a price for bath re-enamelling in Rochford?

Resurfacing from £350. Every job gets a fixed price based on photos of the damage. Send a close-up and a picture of the whole item and your postcode.

Can you quote from photos?

In nearly every case. If photos don’t show enough, we will ask for another angle.

What happens once I’ve sent pictures?

We come back with a fixed quote. There is no obligation to book.

DIY kit or professional repair?

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Landlords, agents and businesses in Rochford

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

We work for landlords, letting agents and housing providers in Rochford as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.

What we’re called out for in Rochford

Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.

Look out for any of the following:

  • A coloured bath you want in white
  • Brown or grey marks that do not clean off
  • A period or roll-top bath worth keeping
  • Enamel that is lost its shine and feels rough

What to look for in a quote

  • If travel is included in the price
  • What protection goes down before work starts
  • What happens if they find more damage
  • Whether the price is fixed and includes VAT

How to compare quotes

Repairing versus replacing in Rochford

A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.

Why us?

  • A fixed quote before booking
  • Rooms protected and left tidy
  • No extra charge for your area
  • Colour-matched on site

Read our pricing or guide to resurfacing and replacement costs.

Materials and what they mean for the repair

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.