Shropshire · England

Bath Re-enamelling in Rockgreen

Full bath re-enamelling and resurfacing for householders, landlords and businesses in Rockgreen. Send photos for a free, fixed quote.

  • Resurfacing from £350
  • Enamel that is lost its shine and feels rough
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Rockgreen

Bath re-enamelling at your home in Rockgreen

After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we do not cut corners on it. Our technicians work on acrylic baths, basins & shower trays and Victorian roll-tops, and common reasons people get in touch are chips and rust in more than one place and a roll-top that’s seen better days.

Every job is backed for twelve months in Rockgreen and everywhere else. We return to put right any problem with the work.

Location
Rockgreen (SY8)
County
Shropshire
Cover
12 months on all our work
Price
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Page updated
23 October 2026
Before and after: an old basin refinished to bright white

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Problems we can’t see until an old finish comes off
  • Leaking taps or wastes (a plumber’s job)
  • A bath that’s rusted through

Not sure? Send photos and we’ll give you a straight answer.

What we work on

  • Victorian roll-tops
  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths

Looking after it afterwards

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Wash away dyes and oils after use
  • Never use suction bath mats
  • Fix dripping taps quickly
  • A quick wipe after use keeps limescale away

Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.

The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.

Repairs by material

Acrylic

Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is the part we put right.

When to call us in Rockgreen

Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is usually as strong as ever.

People usually call us after spotting one of these:

  • A period or roll-top bath worth keeping
  • A coloured bath you want in white
  • Chips and rust in more than one place
  • Brown or grey marks that do not clean off

What to look for in a quote

  • Whether they match the colour on site
  • How the room is protected while they work
  • Whether a trained technician does the job
  • What the guarantee covers, and for how long

Our hiring checklist

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.

What happens on the day

We agree an arrival time beforehand, so you are not left guessing. On site, it takes most of the day for most jobs. We leave the room clean.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the next day.

Preparing for the visit

  • Open a window if you can
  • Mention if the room is upstairs or in a flat
  • Let us know if it has been repaired before

Get a quote

Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.

Get a fixed quote

Read more

Rockgreen: your questions answered

What does bath re-enamelling cost?

Resurfacing from £350. We give a fixed price from your pictures. Send a close-up of the damage and a wider photo with your SY8 postcode.

Will there be a smell?

Expect a mild smell while we are working that clears as it cures.

Will the bath be moved?

Not at all. We work on the bath in place, with the room masked and ventilated.

Is the work guaranteed?

Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.

What information do you need?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Do you hold any accreditations?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Is there a smell?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

When can you do it?

It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.

What affects the price in Rockgreen

Prices start from £350. Prices are worked out job by job, from your pictures. The main factors are:

  • The colour and finish to match
  • Whether it’s a chip, crack, burn or wear
  • How much damage there is
  • Access to the area

No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

How to get a fixed price

Almost every job we do is priced from pictures. This is what we need:

  • A coin or ruler next to the damage for scale
  • Any earlier repairs or coatings
  • The postcode, so we can plan the visit
  • A photo taken from further back

Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.

About Rockgreen

Rockgreen is about 16 miles south-west of Bridgnorth, in Shropshire. From the centre of Rockgreen to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Rockgreen is one of 433 towns and villages in Shropshire we cover. You can also see our page for Birmingham, about 35 miles away.

We cover every part of the SY8 postcode area. From Rocks Green, Knights Way and Powys Drive or anywhere nearby, we can come to you. Other places close to Rockgreen include Sheet (1 mile south-east), Lower Ledwyche (1 mile south-east), Henley (1 mile east), Middleton (1 mile north-east) and Snitton (2 miles east). We also work in nearby towns such as Church Stretton (12 miles north), Craven Arms (7 miles north-west), Cleobury Mortimer (9 miles east), Bishop's Castle (15 miles north-west), Highley (14 miles east) and Clun (14 miles west).

Around Rockgreen

Around Rockgreen, we work in homes near Ludlow Junior School, Ludlow College and St John's, among other places. For rail, the closest station is Ludlow station, roughly 0.9 miles south-west of the centre. Nearby you will also find Ludlow Castle (1.3 miles south-west) and Ludlow Community Hospital (0.7 miles south-west). The countryside around Rockgreen includes High Vinnalls.

Map of Rockgreen © OpenStreetMap contributors

Repair or replace: which is better?

A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the whole surface with the bath left where it is. Our bath re-enamelling starts from £350. We charge the same wherever you are, with no extra for Rockgreen. What changes the price is the job itself: the material, the amount of damage and how many items.

Why us?

  • A fixed quote before booking
  • One-year guarantee on every repair
  • One visit for most repairs
  • No extra charge for your area

Read our prices page and guide to resurfacing and replacement costs.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.