Dorset · England
Bath Re-enamelling in Rousdon
Damaged bath in Rousdon? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
Rousdon: your questions answered
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Do you cover the entire of Dorset?
We cover the whole UK, including Rousdon and the rest of Dorset. Just include your postcode and we will offer you dates.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item and your postcode.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Do you cover Rousdon?
We do. We send a technician to Rousdon for every job, and the price is the same as everywhere else.
About our bath re-enamelling in Rousdon
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Our technicians work on Victorian roll-tops, acrylic baths and basins & shower trays, and the jobs we see most are a bath that stays dull however much you clean it and an old resurfacing that’s failing.
You get a one-year guarantee, the same in Rousdon as everywhere else we work.
- Area
- Rousdon (DT7)
- Area hub
- Dorset
- Warranty
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Rousdon
Other services in Rousdon
What we do, step by step
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and we start. You can expect it to take a full day, and we’ll keep you posted as we go.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the following day.
Preparing for the visit
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
- Have a window or extractor fan available
Get a quote
To get a price, send two or three photos through our quote form or ring us. We will say immediately whether it can be repaired.
Read more
Repairing versus replacing in Rousdon
A replacement frequently means several trades over several days. Re-enamelling is one technician, generally one day, with the bath back in use the next day. Our bath re-enamelling starts from £350. Compared with replacing, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- Straight answers about what a repair can do
- CHAS, Constructionline and SafeContractor accredited
- Dust sheets down, tidy finish
- No extra charge for your area
See our prices page or guide to resurfacing and replacement costs.
What affects the price in Rousdon
Prices start from £350. You will not pay by the hour. The price depends on:
- Any earlier repairs that need removing first
- The type of damage
- The size and number of damaged areas
- How many items we do on one visit
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Quotes from your pictures
A couple of clear pictures is all it takes. Try to include:
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- What it’s made of, if you know
- One sharp close-up of the damage
Most customers in Rousdon get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
- Do not leave bottles, razors or sponges standing on the surface
- Avoid suction-cup mats
Rinse the bath and wipe it over after use, especially in hard water areas, to stop limescale building up.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What we can’t put right
Before booking, it’s worth knowing the limits too:
- A cast iron or steel bath that is cracked right through
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Rousdon
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
Where we work around Rousdon
Rousdon is about 10 miles south-east of Honiton, in Dorset. Jobs in Rousdon are booked in like any other job: a fixed price from your pictures, then a visit to do the work. Rousdon is one of 462 places in Dorset we cover.
Our visits in DT7 work the same way as everywhere else we cover. We regularly work on streets such as School Lane and Combpyne Lane and the roads around them. Other places close to Rousdon include Holcombe (2 miles north-east), Ware (2 miles east), Uplyme (2 miles north-east), Yawl (3 miles north-east) and Lyme Regis (3 miles east). Within a short drive, we also cover Bridport (11 miles east), Beaminster (13 miles north-east), Allington (10 miles east), Charmouth (4 miles east), Burton Bradstock (12 miles east) and Bradpole (11 miles east).
Near you in Rousdon
In Rousdon, that means homes near Church of St Mary and The Woodroffe School and the streets around them. Rousdon’s nearest station is Axminster station, roughly 4.3 miles north. Further afield, we also cover the area around Axminster Hospital (4.6 miles north) and Museum of Motoring Memories (2.9 miles west).
About our accreditations · Every repair comes with a one-year guarantee.
