Surrey · England
Bath Re-enamelling for Rowledge homes
Bath re-enamelling across Rowledge and nearby, typically in one visit.
- Resurfacing from £350
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
Bath re-enamelling in Rowledge, done in place
Re-enamelling is a one-day job for most baths, and you can use the bath the day after. Taps, tiles, panels and plumbing all stay in place. Whether it’s staining under the taps and around the waste and a peeling or bubbling previous coating, we can help.
All our work comes with a one-year guarantee, wherever you are in Surrey.
- Area
- Rowledge (GU10)
- Region
- Surrey
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Towns and villages near Rowledge
Other services in Rowledge
What affects the price in Rowledge
Prices start from £350. A fixed quote means you know the cost before booking. We look at:
- Doing more than one item at once
- How many areas need work
- The type of damage
- Unusual colours or finishes
We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your pictures
Two or three clear photos are normally enough. Try to include:
- A photo taken from further back
- A coin beside the damage so we can judge size
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
When we would advise against a repair
We’ll always be straight with you, so here’s what a repair won’t do:
- A cast iron or steel bath that’s cracked right through
- A bath that’s rusted through
- Leaking taps or wastes (a plumber’s job)
If in doubt, send pictures and we will say what we think.
What we work on
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Do you need bath re-enamelling in Rowledge?
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Look out for these signs:
- Brown or grey marks that do not clean off
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- Several chips and rust patches
What to look for in a quote
- Aftercare advice
- Who turns up on the day
- Whether the price is fixed and includes VAT
- Whether there are any call-out or travel charges
Our work in Rowledge
Rowledge is about 2 miles south-west of Farnham, in Surrey. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. We work in 395 places across Surrey. Our jobs stretch from Rowledge to London (38 miles away).
Our visits in GU10 work the same way as everywhere else we cover. You’ll find streets such as High Street, Chapel Road and Bell Lane. Neighbouring places we cover include Holt Pound (1 mile west), Boundstone (1 mile north-east), Wrecclesham (1 mile north), Shortheath (1 mile north-east) and Batt's Corner (1 mile south). Within a short drive, we also cover Guildford (12 miles east), Woking (14 miles north-east), Camberley (11 miles north), Frimley (10 miles north-east), Haslemere (8 miles south-east) and Cranleigh (15 miles east).
What’s near Rowledge
Our customers here include homes close to Saint James, The Hare and Hounds pub and Rowledge Church of England Controlled Primary School. Other local landmarks include Underdown nature reserve (0.8 miles north-east), Weydon School (1.3 miles north) and Edgeborough School (1.2 miles east). Rowledge’s nearest station is Bentley (Hampshire) station, about 2 miles west. A little further out are Chase Community Hospital (5.6 miles south) and Museum of Farnham (2.2 miles north). Green spaces nearby include Beacon Hill and Farnham Heath.
Your questions about bath re-enamelling in Rowledge
Will there be a smell?
There may be a mild smell during the work that clears as it cures.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
How long does re-enamelling take?
Typically one day, with the bath ready the day after. A badly pitted bath can need a second day.
How do I get a price for bath re-enamelling in Rowledge?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before you book.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
What happens on the day
We begin by going over the job with you, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. You can expect it to take the best part of a day, and we will keep you posted as we go.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can generally be used the following day.
Before we arrive
- Mention any parking restrictions or tricky access
- Move bottles, mats and clutter away from the area
- Make sure the area is dry
Getting a price
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll say immediately whether it can be repaired.
Related advice
Keeping it looking good
To keep it looking its best:
- Store bottles off the bath
- Wash away dyes and oils after use
- Don’t use the bath until it has fully cured
- Dry the bath after use to stop limescale
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Repairing versus replacing in Rowledge
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Why Rowledge customers choose us
- Every repair guaranteed for a year
- Free fixed quotes from pictures
- CHAS and Constructionline accredited
- Honest advice, even when it means no job
See our prices page or guide to resurfacing and replacement costs.
Landlords, agents and businesses in Rowledge
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
For developers and builders, we fix damage before handover. We can visit several plots in one trip to keep costs down.
About our accreditations · Every repair comes with a one-year guarantee.
