Bolton · England
Bath Re-enamelling for Rumworth homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Rumworth. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A roll-top that’s seen better days
- A dull, rough surface that won’t come clean
Bath re-enamelling in Rumworth, done in place
Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. We work on basins & shower trays, Victorian roll-tops and pressed steel baths, and common reasons people contact us are stains that won’t shift and a dull, rough surface that won’t come clean.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Where
- Rumworth (BL3, BL6, BL1)
- Area hub
- Bolton
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
We work for landlords, letting agents and housing providers in Rumworth as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
If you manage property in Rumworth, we will quote for several properties at once. Just send pictures for each address and we will price them together.
Places near Rumworth
Also in Rumworth
Prices and what affects them
Resurfacing from £350. There’s no charge for travel to Rumworth. The price comes down to:
- How much damage there is
- Unusual colours or finishes
- Whether we combine several jobs
- The material and finish
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Send pictures for a quote
Before you send photos, a few simple things make all the difference:
- Any earlier repairs or coatings
- A picture taken from further back
- A coin or ruler next to the damage for scale
- Any details about the material
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
How to care for the repair
To keep it looking its best:
- Avoid suction-cup mats
- Wipe the bath dry after use in hard water areas
- Don’t let dyes or oils sit on the finish
- Leave the bath for the full curing time before using it
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
How it works
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Allow most of the day. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Keep pets and children out of the room while we work
- Let the surface dry out before the visit
- Have somewhere for us to park nearby if possible
How to get a price
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and you’re under no obligation.
Related advice
Rumworth and the surrounding area
Rumworth is about 1 mile west of Daubhill, in Bolton. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. Rumworth is one of 61 towns and villages in Bolton we cover. You can also see our page for Manchester, about 13 miles away.
Postcode districts we cover here: BL3, BL6 and BL1. We regularly work on streets such as Lock Lane, Heaton Road and Tempest Road. If you’re just outside Rumworth, we cover Deane (1 mile east), Hunger Hill (1 mile south), Markland Hill (1 mile north), Heaton (1 mile north-east) and Chequerbent (1 mile south). Larger places within reach include Horwich (3 miles north-west), Farnworth (3 miles east), Kearsley (5 miles east), Little Lever (5 miles east), Moses Gate (4 miles east) and Woolfold (7 miles east).
What’s near Rumworth
Typical jobs here are in homes near Ladybridge High School, The Lostock Arms and Beaumont Primary School. For rail, the closest station is Lostock station, roughly 0.6 miles north-west. Well-known places in the area include Bolton Royal Infirmary (1.9 miles north-east) and Blackrod Castle Croft (4.2 miles north-west). Green spaces nearby include Nob End and Noon Hill.
- Local facilities include Bolton le Moors (2.3 miles east)
When to call us in Rumworth
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Keep an eye out for any of the following:
- Brown or grey marks that don’t clean off
- A roll-top that is seen better days
- Wear marks under the taps
- Several chips and rust patches
Comparing quotes
- How the room is protected while they work
- Who turns up on the day
- Whether there are any call-out or travel charges
- When it can be used again
What we can’t put right
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Problems we cannot see until an old finish comes off
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
If in doubt, send photos and we’ll say what we think before you book.
Materials we work on in Rumworth
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Repair or replace in Rumworth?
A replacement frequently means several trades over several days. Re-enamelling is one technician, normally one day. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Rumworth. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- One price list for the entire UK
- One-year guarantee on every repair
- CHAS and Constructionline accredited
- Colours mixed by hand to suit your surface
Take a look at our pricing or guide to resurfacing and replacement costs.
FAQs for Rumworth
Do you come to Rumworth?
Yes. We work across the UK and travel to Rumworth and the rest of Bolton. Send us photos for a fixed quote, or call 0345 017 0787.
What happens after I send photos?
We review the photos and send a fixed quote with dates.
What areas do you cover?
Across the UK. Prices don’t change with location.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send pictures of everything you’d like done.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
DIY kit or professional repair?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
About our accreditations · Every repair comes with a one-year guarantee.
