Lincolnshire · England
Bath Re-enamelling in Saltfleet
Bath re-enamelling for Saltfleet, without a refit. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- Stains that won’t shift
- An old resurfacing that’s failing
Bath re-enamelling at your home in Saltfleet
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. We are often asked to fix a roll-top that’s seen better days and a coating lifting around the plughole, on pressed steel baths, acrylic baths and cast iron baths.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Location
- Saltfleet (LN11)
- Region
- Lincolnshire
- Cover
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair cannot fix
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- Problems we cannot see until an old finish comes off
- Plumbing leaks, which need a plumber
- An acrylic bath that flexes badly underfoot
Send us pictures and we will tell you honestly before booking.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
Towns and villages near Saltfleet
More services for Saltfleet
Repair or replace in Saltfleet?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Compared with replacing, repairing typically costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- Repair technicians who travel to you, UK-wide
- Most jobs done in one visit
- Nothing taken out or refitted
- No extra charge for your area
See our full price list or resurfacing vs replacement cost guide.
Where we work around Saltfleet
Saltfleet is about 8 miles north-east of Louth, in Lincolnshire. From the centre of Saltfleet to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Saltfleet is one of 732 places in Lincolnshire where we work. Our nearest city page is Leeds, about 76 miles away.
Every address in LN11 is covered. From Jacklin Drive, Pump Lane and The Hill or a nearby road, a technician can come to you. Close by, we cover Skidbrooke North End (1 mile north-west), Skidbrooke (1 mile south-west), South Somercotes (2 miles west), North Somercotes (3 miles north-west) and Scupholme (3 miles south-west). Within a short drive, we also cover Louth (8 miles south-west), New Waltham (12 miles north-west), Mablethorpe (6 miles south-east), Humberston (12 miles north-west), Sutton on Sea (9 miles south-east) and Alford (11 miles south).
Around Saltfleet
Locally, our jobs take us to homes close to St Botolph's Church and The New Inn, among other places. Green spaces nearby include Donna Nook.
What bath re-enamelling costs
Resurfacing from £350. We charge the same across the UK, including Saltfleet. What changes the price is:
- The material and finish
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
- Unusual colours or finishes
The price reflects the work involved, not your postcode. You’ll see the full price before booking, with no extras added later.
Quotes from your photos
Two or three clear pictures are normally enough. Try to include:
- What it’s made of, if you know
- A close-up of the damage, in focus
- Natural light rather than flash
- Your postcode, so we can check dates
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price.
Your questions about bath re-enamelling in Saltfleet
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Does the bath have to be removed?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote.
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Rinse off hair dye, oils and bath bombs immediately
- Respect the curing time we give you
- Get any chip repaired quickly
- Repair dripping taps early
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
How the visit works
On the day itself, there is little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to most of the day, including clearing up.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the following day.
Preparing for the visit
- Mention if the room is upstairs or in a flat
- Ensure the room can be ventilated
- Let the surface dry out before the visit
How to get a price
To get a price, send a couple of photos using our quote form or call us. We will tell you honestly if a repair is the right fix.
Related advice
Signs you need bath re-enamelling in Saltfleet
Previous coatings can fail too, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.
These are the problems we’re asked about most:
- Enamel that is lost its shine and feels rough
- A coating lifting around the plughole
- Lots of chips and rust spots
- Worn patches where water runs and sits
What your quote should include
- What protection goes down before work starts
- How the colour is matched
- How long it needs to cure
- The length of the guarantee and what it covers
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
About our accreditations · Every repair comes with a one-year guarantee.
