Staffordshire · England
Bath Re-enamelling in Sandonbank
Problem with your bath in Sandonbank? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- An old resurfacing that’s failing
Bath re-enamelling in Sandonbank, done in place
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. Our repair technicians work on Victorian roll-tops, pressed steel baths and cast iron baths, and the jobs we see most are an original cast iron bath that needs restoring and an outdated colour you’d like to change.
All our work comes with our one-year guarantee.
- Where
- Sandonbank (ST18)
- Area hub
- Staffordshire
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
Landlords, letting agents and housing providers in Sandonbank use us as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
If you manage property in Sandonbank, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
Prices and what affects them
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- Doing more than one item at once
- What kind of damage it is
- The material
- Whether old repairs or coatings need taking off
We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Send photos for a quote
We price nearly every job from pictures. This is what to send:
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- A wider photo showing the whole bath
We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
What we do, step by step
We work cleanly and quietly. Protection goes down first, then the job itself takes most of the day. Before we leave, we explain the curing time and the aftercare.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Have a window or extractor fan available
- Let us know if it has been repaired before
- Clear the area around the damage
Get a quote
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Advice
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Common questions in Sandonbank
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
How much does bath re-enamelling cost in Sandonbank?
Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Will there be a smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help.
What happens after I send photos?
You will get a fixed quote back, plus dates. You’re under no obligation.
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before.
Repairing versus replacing in Sandonbank
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day. Prices start from £350. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why us?
- We’ll tell you if it’s not worth repairing
- One-year guarantee on every repair
- CHAS, Constructionline and SafeContractor accredited
- Colour-matched on site
Take a look at our full price list or guide to resurfacing and replacement costs.
Our work in Sandonbank
Sandonbank is about 3 miles north-east of Stafford, in Staffordshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Sandonbank is one of 512 places in Staffordshire where we work. You can also see our page for Birmingham, about 27 miles away.
Jobs in ST18 are booked in the same way as anywhere else. From Salt Banks, Sandon Road and Salt Lane or a nearby road, a technician can come to you. Close by, we cover Salt (1 mile east), Hopton (1 mile south), Sandon (1 mile north), Burston (2 miles north) and Weston (2 miles east). Within a short drive, we also cover Stafford (3 miles south-west), Newcastle-under-Lyme (14 miles north-west), Cannock (11 miles south), Longton (10 miles north), Rugeley (9 miles south-east) and Burntwood (13 miles south-east).
What’s near Sandonbank
Around Sandonbank, we work in homes near The Holly Bush Inn, Church of St James and Sir Graham Balfour High School and the streets around them. Sandonbank’s nearest station is Stafford station, roughly 3.3 miles south-west of the centre. A little further out are Chartley Castle (4.1 miles east) and Stafford Hospital (2.4 miles south). Not far away are Tixall Wide and Doxey Marshes.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
Honest limits
A few problems are outside what a surface repair can do:
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
- A metal bath with a through crack
Not sure? Send pictures and we will give you a straight answer.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
How to care for the repair
It’s all simple stuff:
- Rinse off hair dye, oils and bath bombs right away
- Do not leave a chip unrepaired
- Avoid suction-cup mats
- Leave the bath for the full curing time before using it
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
What else we do in Sandonbank
About our accreditations · Every repair comes with a one-year guarantee.
